- 密度 [g/cm3]: 1.48
- 吸水率 [%]: 5.4
- 热变形温度 [℃]: 260.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.48 g/cc | 0.0535 lb/in³ | ISO 1183 | ||
Water Absorption | 5.4 % | 5.4 % | Sim. to ISO 62 | ||
Moisture Absorption at Equilibrium | 1.4 % | 1.4 % | Humidity Absorption; Sim. to ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | Parallel; ISO 294-4 | ||
Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | Normal; ISO 294-4 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength at Break | 185 MPa | 26800 psi | ISO 527-1/-2 | ||
Elongation at Break | 2.5 % | 2.5 % | ISO 527-1/-2 | ||
Tensile Modulus | 11.5 GPa | 1670 ksi | ISO 527-1/-2 | ||
Charpy Impact Unnotched | 7.50 J/cm² @Temperature -30.0 °C | 35.7 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eU | ||
9.50 J/cm² @Temperature 23.0 °C | 45.2 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | |||
Charpy Impact, Notched | 1.00 J/cm² @Temperature -30.0 °C | 4.76 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA | ||
1.50 J/cm² @Temperature 23.0 °C | 7.14 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 20.0 µm/m-°C @Temperature 20.0 °C | 11.1 µin/in-°F @Temperature 68.0 °F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 60.0 µm/m-°C @Temperature 20.0 °C | 33.3 µin/in-°F @Temperature 68.0 °F | ISO 11359-1/-2 | ||
Melting Point | 260 °C | 500 °F | 10°C/min; ISO 11357-1/-3 | ||
Deflection Temperature at 0.46 MPa (66 psi) | 260 °C | 500 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 246 °C | 475 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB @Thickness 0.710 mm | HB @Thickness 0.0280 in | IEC 60695-11-10 | ||
HB @Thickness 1.60 mm | HB @Thickness 0.0630 in | IEC 60695-11-10 | |||
Descriptive Properties | |||||
Injection Molding | Yes | ||||
Lubricants | Yes | ||||
Release agent | Yes | ||||
With fillers | Yes |