Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection物性表参数

Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection

Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection 物性表: Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection物性表及特性介绍,Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection注塑参数详情,如需Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection下载, 可到相关下载区下载

缺口冲击强度: 1.07
拉伸强度 [MPa]: 51.7
断裂伸长率 [%]: 89.6
弯曲模量 [MPa]: 2.76

Mechanical Properties	Metric	English	Comments

Tensile Strength, Yield	51.7 MPa	7500 psi	ASTM D638
Flexural Yield Strength	89.6 MPa	13000 psi	ASTM D790
Flexural Modulus	2.76 GPa	400 ksi	ASTM D790
Izod Impact, Notched	1.07 J/cm @Temperature 22.8 °C	2.00 ft-lb/in @Temperature 73.0 °F	ASTM D256

Electrical Properties	Metric	English	Comments
Surface Resistivity per Square	1.00e+6 - 9.00e+9 ohm	1.00e+6 - 9.00e+9 ohm	ASTM D257

Processing Properties	Metric	English	Comments
Melt Temperature	243 - 279 °C	470 - 535 °F
Mold Temperature	65.6 - 93.3 °C	150 - 200 °F
Dry Time	2 - 4 hour @Temperature 121 °C	2 - 4 hour @Temperature 250 °F	to ensure moisture content is less than 0.02%
Injection Pressure	4.96 - 8.27 MPa	720 - 1200 psi	Secondary
	8.27 - 13.8 MPa	1200 - 2000 psi	Initial
Back Pressure	0.345 - 1.72 MPa	50.0 - 250 psi
Shot Size	30 - 80 %	30 - 80 %
Screw Speed	20 - 100 rpm	20 - 100 rpm

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46451.html

免责声明: 本文 Clariant Renol PA2SP0023 Nylon 6, Impact and Flow Modified, ESD Protection 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息