- 密度 [g/cm3]: 1.3
- 吸水率 [%]: 7.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.30 g/cc | 0.0470 lb/in³ | (DAM); ISO 1183 | ||
Water Absorption | 7.0 % | 7.0 % | (DAM); Sim. to ISO 62 | ||
Moisture Absorption at Equilibrium | 2.1 % | 2.1 % | Humidity Absorption (DAM); Sim. to ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0070 cm/cm | 0.0070 in/in | DAM; ISO 294-4 | ||
Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | Normal (DAM); ISO 294-4 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength at Break | 52.0 MPa | 7540 psi | ISO 527-1/-2 | ||
Elongation at Break | 6.0 % | 6.0 % | ISO 527-1/-2 | ||
Tensile Modulus | 4.40 GPa | 638 ksi | ISO 527-1/-2 | ||
Charpy Impact Unnotched | 5.50 J/cm² @Temperature -30.0 °C | 26.2 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eU | ||
10.5 J/cm² @Temperature 23.0 °C | 50.0 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | |||
Charpy Impact, Notched | 1.05 J/cm² @Temperature -30.0 °C | 5.00 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA | ||
1.05 J/cm² @Temperature 23.0 °C | 5.00 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
Thermal Properties | Metric | English | Comments | ||
Melting Point | 220 °C | 428 °F | 10°C/min (DAM); ISO 11357-1/-3 | ||
Descriptive Properties | |||||
Injection Molding | Yes | ||||
Lubricants | Yes | ||||
Release agent | Yes | ||||
With fillers | Yes |