- 密度 [g/cm3]: 1.38
- 吸水率 [%]: 6.3
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.38 g/cc | 0.0499 lb/in³ | (DAM); ISO 1183 | ||
Water Absorption | 6.3 % | 6.3 % | (DAM); Sim. to ISO 62 | ||
Moisture Absorption at Equilibrium | 1.9 % | 1.9 % | Humidity Absorption (DAM); Sim. to ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | DAM; ISO 294-4 | ||
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | Normal (DAM); ISO 294-4 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength at Break | 110 MPa | 16000 psi | ISO 527-1/-2 | ||
Elongation at Break | 5.0 % | 5.0 % | ISO 527-1/-2 | ||
Tensile Modulus | 6.60 GPa | 957 ksi | ISO 527-1/-2 | ||
Charpy Impact Unnotched | 7.00 J/cm² @Temperature -30.0 °C | 33.3 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eU | ||
11.0 J/cm² @Temperature 23.0 °C | 52.4 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | |||
Charpy Impact, Notched | 1.10 J/cm² @Temperature -30.0 °C | 5.24 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA | ||
3.00 J/cm² @Temperature 23.0 °C | 14.3 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | IEC 60093 | ||
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | IEC 60093 | ||
Dielectric Constant | 5.0 @Frequency 1e+6 Hz | 5.0 @Frequency 1e+6 Hz | IEC 60250 | ||
20 @Frequency 100 Hz | 20 @Frequency 100 Hz | IEC 60250 | |||
Dielectric Strength | 25.0 kV/mm | 635 kV/in | IEC 60243-1 | ||
Dissipation Factor | 0.12 @Frequency 1e+6 Hz | 0.12 @Frequency 1e+6 Hz | IEC 60250 | ||
0.30 @Frequency 100 Hz | 0.30 @Frequency 100 Hz | IEC 60250 | |||
Thermal Properties | Metric | English | Comments | ||
Melting Point | 220 °C | 428 °F | 10°C/min (DAM); ISO 11357-1/-3 | ||
Descriptive Properties | |||||
Heat stabilized or stable to heat | Yes | ||||
Injection Molding | Yes | ||||
Lubricants | Yes | ||||
Release agent | Yes | ||||
With fillers | Yes |