- 密度 [g/cm3]: 1.34
- 吸水率 [%]: 5.7
- 热变形温度 [℃]: 215.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.34 g/cc | 0.0484 lb/in³ | ISO 1183 | ||
Water Absorption | 5.7 % | 5.7 % | Sim. to ISO 62 | ||
Moisture Absorption at Equilibrium | 1.7 % | 1.7 % | Humidity Absorption; Sim. to ISO 62 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength at Break | 130 MPa | 18900 psi | ISO 527-1/-2 | ||
Elongation at Break | 3.5 % | 3.5 % | ISO 527-1/-2 | ||
Tensile Modulus | 9.00 GPa | 1310 ksi | ISO 527-1/-2 | ||
Charpy Impact Unnotched | 10.5 J/cm² @Temperature 23.0 °C | 50.0 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | ||
11.5 J/cm² @Temperature -30.0 °C | 54.7 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eU | |||
Charpy Impact, Notched | 2.00 J/cm² @Temperature -30.0 °C | 9.52 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA | ||
3.50 J/cm² @Temperature 23.0 °C | 16.7 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | IEC 60093 | ||
Dielectric Constant | 3.5 @Frequency 1e+6 Hz | 3.5 @Frequency 1e+6 Hz | IEC 60250 | ||
3.8 @Frequency 100 Hz | 3.8 @Frequency 100 Hz | IEC 60250 | |||
Dielectric Strength | 25.0 kV/mm | 635 kV/in | IEC 60243-1 | ||
Dissipation Factor | 0.0090 @Frequency 100 Hz | 0.0090 @Frequency 100 Hz | IEC 60250 | ||
0.015 @Frequency 1e+6 Hz | 0.015 @Frequency 1e+6 Hz | IEC 60250 | |||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 20.0 µm/m-°C @Temperature 20.0 °C | 11.1 µin/in-°F @Temperature 68.0 °F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 65.0 µm/m-°C @Temperature 20.0 °C | 36.1 µin/in-°F @Temperature 68.0 °F | ISO 11359-1/-2 | ||
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1/-3 | ||
Deflection Temperature at 0.46 MPa (66 psi) | 215 °C | 419 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 200 °C | 392 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB @Thickness 0.800 mm | HB @Thickness 0.0315 in | IEC 60695-11-10 | ||
HB @Thickness 1.60 mm | HB @Thickness 0.0630 in | IEC 60695-11-10 | |||
Descriptive Properties | |||||
High impact or impact modified | Yes | ||||
Injection Molding | Yes | ||||
Lubricants | Yes | ||||
Release agent | Yes | ||||
With fillers | Yes |