- 密度 [g/cm3]: 1.33
- 吸水率 [%]: 6.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.33 g/cc | 0.0480 lb/in³ | (DAM); ISO 1183 | ||
Water Absorption | 6.0 % | 6.0 % | (DAM); Sim. to ISO 62 | ||
Moisture Absorption at Equilibrium | 1.8 % | 1.8 % | Humidity Absorption (DAM); Sim. to ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | DAM; ISO 294-4 | ||
Linear Mold Shrinkage, Transverse | 0.011 cm/cm | 0.011 in/in | Normal (DAM); ISO 294-4 | ||
Mechanical Properties | Metric | English | Comments | ||
Tensile Strength at Break | 110 MPa | 16000 psi | ISO 527-1/-2 | ||
Elongation at Break | 7.0 % | 7.0 % | ISO 527-1/-2 | ||
Tensile Modulus | 6.00 GPa | 870 ksi | ISO 527-1/-2 | ||
Charpy Impact Unnotched | 6.50 J/cm² @Temperature -30.0 °C | 30.9 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eU | ||
9.50 J/cm² @Temperature 23.0 °C | 45.2 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | |||
Charpy Impact, Notched | 1.10 J/cm² @Temperature -30.0 °C | 5.24 ft-lb/in² @Temperature -22.0 °F | ISO 179/1eA | ||
2.20 J/cm² @Temperature 23.0 °C | 10.5 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eA | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | IEC 60093 | ||
Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | IEC 60093 | ||
Dielectric Constant | 5.0 @Frequency 1e+6 Hz | 5.0 @Frequency 1e+6 Hz | IEC 60250 | ||
14 @Frequency 100 Hz | 14 @Frequency 100 Hz | IEC 60250 | |||
Dissipation Factor | 0.12 @Frequency 1e+6 Hz | 0.12 @Frequency 1e+6 Hz | IEC 60250 | ||
0.30 @Frequency 100 Hz | 0.30 @Frequency 100 Hz | IEC 60250 | |||
Thermal Properties | Metric | English | Comments | ||
Melting Point | 220 °C | 428 °F | 10°C/min (DAM); ISO 11357-1/-3 | ||
Descriptive Properties | |||||
Heat stabilized or stable to heat | Yes | ||||
Injection Molding | Yes | ||||
With fillers | Yes |