DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond)物性表参数

DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond)

DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond) 物性表: DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond)物性表及特性介绍,DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond)注塑参数详情,如需DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond)下载, 可到相关下载区下载

密度 [g/cm3]: 1.13
吸水率 [%]: 10.0
拉伸强度 [MPa]: 60.0

Physical Properties	Metric	English	Comments

Density	1.13 g/cc	0.0408 lb/in³	(DAM); ISO 1183
Water Absorption	10 %	10 %	DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium	2.8 %	2.8 %	Humidity Absorption (DAM); Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.0095 cm/cm	0.0095 in/in	DAM; ISO 294-4
	0.0095 cm/cm	0.0095 in/in	DAM; ISO 294-4

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	60.0 MPa	8700 psi	ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	ISO 527-1/-2
Elongation at Yield	20 %	20 %	ISO 527-1/-2
Tensile Modulus	1.70 GPa	247 ksi	ISO 527-1/-2
Charpy Impact Unnotched	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
	NB @Temperature 23.0 °C	NB @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.500 J/cm² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
	3.50 J/cm² @Temperature 23.0 °C	16.7 ft-lb/in² @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	4.7 @Frequency 1e+6 Hz	4.7 @Frequency 1e+6 Hz	IEC 60250
	15 @Frequency 100 Hz	15 @Frequency 100 Hz	IEC 60250
Dielectric Strength	20.0 kV/mm	508 kV/in	IEC 60243-1
Dissipation Factor	0.13 @Frequency 1e+6 Hz	0.13 @Frequency 1e+6 Hz	IEC 60250
	0.39 @Frequency 100 Hz	0.39 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	10°C/min (DAM); ISO 11357-1/-3

Descriptive Properties
Injection Molding	Yes
Release Agent	Yes
Without Fillers	Yes

关键词:
供应
PA6
DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46602.html

免责声明: 本文 DSM Akulon® F223-D Nylon 6 (European and Asian Grade) (Cond) 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络