- 密度 [g/cm3]: 1.16
- 吸水率 [%]: 1.1
- 拉伸强度 [MPa]: 50.0
- 热变形温度 [℃]: 135.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.16 g/cc | 0.0419 lb/in³ | ISO 1183 | ||
Water Absorption | 1.1 % | 1.1 % | ISO 62 | ||
Moisture Absorption | 0.600 % | 0.600 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.012 cm/cm | 0.012 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.014 cm/cm | 0.014 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore D | 72 | 72 | conditioned, 15s; ISO 868 | ||
Tensile Strength at Break | 40.0 MPa | 5800 psi | conditioned; ISO 527-1/-2 | ||
50.0 MPa | 7250 psi | dry; ISO 527-1/-2 | |||
Tensile Strength, Yield | 50.0 MPa | 7250 psi | conditioned; ISO 527-1/-2 | ||
55.0 MPa | 7980 psi | dry; ISO 527-1/-2 | |||
Elongation at Break | 25 % | 25 % | dry; ISO 527-1/-2 | ||
30 % | 30 % | conditioned; ISO 527-1/-2 | |||
Elongation at Yield | 5.0 % | 5.0 % | dry; ISO 527-1/-2 | ||
10 % | 10 % | conditioned; ISO 527-1/-2 | |||
Tensile Modulus | 1.90 GPa | 276 ksi | conditioned; ISO 527-1/-2 | ||
2.20 GPa | 319 ksi | dry; ISO 527-1/-2 | |||
Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
NB | NB | conditioned; ISO 179/1eU | |||
5.00 J/cm² @Temperature 30.0 °C | 23.8 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 0.200 J/cm² | 0.952 ft-lb/in² | conditioned; ISO 179/1eA | ||
0.300 J/cm² | 1.43 ft-lb/in² | dry; ISO 179/1eA | |||
0.200 J/cm² @Temperature 30.0 °C | 0.952 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
0.300 J/cm² @Temperature 30.0 °C | 1.43 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 100 ohm-cm | 100 ohm-cm | conditioned; IEC 60093 | ||
Surface Resistance | 100 ohm | 100 ohm | IEC 60093 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 130 µm/m-°C | 72.2 µin/in-°F | ISO 11359-1/-2 | ||
Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
Maximum Service Temperature, Air | 90.0 - 110 °C | 194 - 230 °F | long term; EMS | ||
150 °C | 302 °F | short term; EMS | |||
Deflection Temperature at 0.46 MPa (66 psi) | 135 °C | 275 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 65.0 °C | 149 °F | ISO 75-1/-2 | ||
Descriptive Properties | |||||
Automotive | Automotive electr. and electronics, lighting | ||||
Powertrain and Chassis | |||||
Electricals & Electronics | Connectors | ||||
Electrical equipment | |||||
Form | Granules | ||||
Industry & Consumer goods | Mechanical Engineering | ||||
Tools & Accessories | |||||
Processing | Injection Molding | ||||
Special Characteristics | Anti-static | ||||
Improved heat resistance |