- 密度 [g/cm3]: 0.98
- 吸水率 [%]: 1.3
- 拉伸强度 [MPa]: 30.0
- 热变形温度 [℃]: 80.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 0.980 g/cc | 0.0354 lb/in³ | ISO 1183 | ||
Water Absorption | 1.3 % | 1.3 % | ISO 62 | ||
Moisture Absorption | 0.600 % | 0.600 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.010 cm/cm | 0.010 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.016 cm/cm | 0.016 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore D | 66 | 66 | conditioned, 15s; ISO 868 | ||
Tensile Strength at Break | 40.0 MPa | 5800 psi | conditioned; ISO 527-1/-2 | ||
45.0 MPa | 6530 psi | dry; ISO 527-1/-2 | |||
Tensile Strength, Yield | 30.0 MPa | 4350 psi | dry; ISO 527-1/-2 | ||
35.0 MPa | 5080 psi | dry; ISO 527-1/-2 | |||
Elongation at Break | >= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | ||
<= 50 % | <= 50 % | dry; ISO 527-1/-2 | |||
Elongation at Yield | 12 % | 12 % | dry; ISO 527-1/-2 | ||
15 % | 15 % | conditioned; ISO 527-1/-2 | |||
Tensile Modulus | 0.750 GPa | 109 ksi | conditioned; ISO 527-1/-2 | ||
1.00 GPa | 145 ksi | dry; ISO 527-1/-2 | |||
Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
NB | NB | conditioned; ISO 179/1eU | |||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 10.0 J/cm² | 47.6 ft-lb/in² | dry; ISO 179/1eA | ||
10.0 J/cm² | 47.6 ft-lb/in² | conditioned; ISO 179/1eA | |||
7.50 J/cm² @Temperature 30.0 °C | 35.7 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
8.00 J/cm² @Temperature 30.0 °C | 38.1 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 120 µm/m-°C | 66.7 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 140 µm/m-°C | 77.8 µin/in-°F | ISO 11359-1/-2 | ||
Melting Point | 178 °C | 352 °F | 10°C/min; ISO 11357-1/-3 | ||
Maximum Service Temperature, Air | 90.0 - 100 °C | 194 - 212 °F | long term; EMS | ||
150 °C | 302 °F | short term; EMS | |||
Deflection Temperature at 0.46 MPa (66 psi) | 80.0 °C | 176 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 45.0 °C | 113 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
Descriptive Properties | |||||
Automotive | Air intake sytems | ||||
Compressed air systems | |||||
Cooling and climate control | |||||
Electricals & Electronics | Cables & Tubes | ||||
Form | Granules | ||||
Industry & Consumer goods | Hydraulics & Pneumatics | ||||
Sports & Leisure | |||||
Processing | Injection Molding | ||||
Other Extrusion | |||||
Product Attributes | High viscosity | ||||
Hydrolysis resistant | |||||
Special Characteristics | High impact or impact modified | ||||
Improved heat resistance | |||||
Improved UV resistance (outdoor use) |