- 密度 [g/cm3]: 1.06
- 吸水率 [%]: 3.5
- 拉伸强度 [MPa]: 75.0
- 热变形温度 [℃]: 145.0
- 透光率 [%]: 90.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.06 g/cc | 0.0383 lb/in³ | ISO 1183 | ||
Water Absorption | 3.5 % | 3.5 % | ISO 62 | ||
Moisture Absorption | 1.50 % | 1.50 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.0060 cm/cm | 0.0060 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Ball Indentation Hardness | 120 MPa | 17400 psi | conditioned; ISO 2039-1 | ||
Tensile Strength at Break | 50.0 MPa | 7250 psi | conditioned; ISO 527-1/-2 | ||
Tensile Strength, Yield | 75.0 MPa | 10900 psi | conditioned; ISO 527-1/-2 | ||
Elongation at Break | >= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | ||
>= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | |||
Elongation at Yield | 9.0 % | 9.0 % | conditioned; ISO 527-1/-2 | ||
Tensile Modulus | 2.20 GPa | 319 ksi | conditioned; ISO 527-1/-2 | ||
Charpy Impact Unnotched | NB | NB | conditioned; ISO 179/1eU | ||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | conditioned; ISO 179/1eA | ||
0.700 J/cm² @Temperature 30.0 °C | 3.33 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | conditioned; IEC 60093 | ||
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
Dielectric Strength | 31.0 kV/mm | 787 kV/in | conditioned; IEC 60243-1 | ||
Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 80.0 µm/m-°C | 44.4 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 80.0 µm/m-°C | 44.4 µin/in-°F | ISO 11359-1/-2 | ||
Maximum Service Temperature, Air | 80.0 - 100 °C | 176 - 212 °F | long term; EMS | ||
120 °C | 248 °F | short term; EMS | |||
Transformation Temperature, Tg | 160 °C | 320 °F | 10°C/min; ISO 11357-1/-2 | ||
Deflection Temperature at 0.46 MPa (66 psi) | 145 °C | 293 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 130 °C | 266 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
Optical Properties | Metric | English | Comments | ||
Transmission, Visible | 90.0 % | 90.0 % | transparent; thickness not quantified | ||
Descriptive Properties | |||||
Food contact | EU Requirements | ||||
FDA | |||||
Form | Granules | ||||
Medical | FDA | ||||
Packaging | Blow moulded containers | ||||
Injectionstretchblowmoulded containers | |||||
Processing | Extrusion - blow molding | ||||
Injection (stretch) blow molding | |||||
Other Extrusion | |||||
Special Characteristics | Transparent |