- 密度 [g/cm3]: 1.08
- 吸水率 [%]: 0.2
- 缺口冲击强度: 0.534
- 拉伸强度 [MPa]: 103.0
- 弯曲模量 [MPa]: 7.24
- 硬度: 115.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.08 g/cc | 0.0390 lb/in³ | ASTM D792 |
Water Absorption | 0.20 % @Time 86400 sec | 0.20 % @Time 24.0 hour | ASTM D570 |
Linear Mold Shrinkage, Flow | 0.0060 cm/cm @Thickness 3.17 mm | 0.0060 in/in @Thickness 0.125 in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell R | 115 | 115 | ASTM D785 |
Tensile Strength, Yield | 103 MPa | 15000 psi | ASTM D638 |
Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
Flexural Strength | 152 MPa | 22000 psi | ASTM D790 |
Flexural Modulus | 7.24 GPa | 1050 ksi | ASTM D790 |
Izod Impact, Notched | 0.534 J/cm @Thickness 3.17 mm | 1.00 ft-lb/in @Thickness 0.125 in | ASTM D256 |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 100 - 1.00e+6 ohm-cm | 100 - 1.00e+6 ohm-cm | ASTM D257 |
Surface Resistance | 100 - 1.00e+6 ohm | 100 - 1.00e+6 ohm | ASTM D257 |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 48.6 µm/m-°C | 27.0 µin/in-°F | ASTM D696 |
Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | Unannealed; ASTM D648 |