Overview of materials for Nylon 11 with 30% Glass Fiber Filler

Overview of materials for Nylon 11 with 30% Glass Fiber Filler 物性表: Overview of materials for Nylon 11 with 30% Glass Fiber Filler物性表及特性介绍,Overview of materials for Nylon 11 with 30% Glass Fiber Filler注塑参数详情,如需Overview of materials for Nylon 11 with 30% Glass Fiber Filler下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.25
  • 吸水率 [%]: 0.1
  • 缺口冲击强度: 1.07
  • 断裂伸长率 [%]: 124
  • 弯曲强度 [MPa]: 86.2
  • 弯曲模量 [MPa]: 5.52
  • 热变形温度 [℃]: 180.0
 
Physical PropertiesMetricEnglishComments
Density 1.25 - 1.44 g/cc0.0452 - 0.0520 lb/in³Average value: 1.29 g/cc Grade Count:5
Water Absorption 0.100 - 1.30 %0.100 - 1.30 %Average value: 0.523 % Grade Count:3
Linear Mold Shrinkage 0.00100 - 0.00300 cm/cm0.00100 - 0.00300 in/inAverage value: 0.00217 cm/cm Grade Count:3
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 86.2 - 115 MPa12500 - 16700 psiAverage value: 101 MPa Grade Count:4
Elongation at Break 2.50 - 8.00 %2.50 - 8.00 %Average value: 5.30 % Grade Count:5
Modulus of Elasticity 6.55 - 8.00 GPa950 - 1160 ksiAverage value: 7.31 GPa Grade Count:4
Flexural Yield Strength 124 - 179 MPa18000 - 26000 psiAverage value: 145 MPa Grade Count:3
Flexural Modulus 5.52 - 6.07 GPa800 - 880 ksiAverage value: 5.70 GPa Grade Count:3
Izod Impact, Notched 1.07 - 1.76 J/cm2.00 - 3.30 ft-lb/inAverage value: 1.39 J/cm Grade Count:3
Charpy Impact Unnotched 8.39 - 8.39 J/cm²
@Temperature -30.0 - -30.0 °C
39.9 - 39.9 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 8.39 J/cm² Grade Count:1
Charpy Impact, Notched 1.20 - 1.20 J/cm²
@Temperature -30.0 - -30.0 °C
5.71 - 5.71 ft-lb/in²
@Temperature -22.0 - -22.0 °F
Average value: 1.20 J/cm² Grade Count:1
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+11 - 7.00e+13 ohm-cm1.00e+11 - 7.00e+13 ohm-cmAverage value: 2.67e+13 ohm-cm Grade Count:3
Dielectric Strength 17.7 - 45.0 kV/mm450 - 1140 kV/inAverage value: 27.5 kV/mm Grade Count:3
 
Thermal PropertiesMetricEnglishComments
CTE, linear 50.0 - 54.0 µm/m-°C27.8 - 30.0 µin/in-°FAverage value: 52.7 µm/m-°C Grade Count:3
Deflection Temperature at 0.46 MPa (66 psi) 180 - 192 °C356 - 378 °FAverage value: 185 °C Grade Count:3
Deflection Temperature at 1.8 MPa (264 psi) 175 - 177 °C347 - 350 °FAverage value: 176 °C Grade Count:3
Flammability, UL94 HBHBGrade Count:4

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47311.html

免责声明: 本文 Overview of materials for Nylon 11 with 30% Glass Fiber Filler 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4