- 吸水率 [%]: 0.2
- 缺口冲击强度: 1.55
- 弯曲强度 [MPa]: 200.0
- 弯曲模量 [MPa]: 11.7
Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 1.52 g/cc | 1.52 g/cc | ASTM D792 |
Water Absorption | 0.20 % | 0.20 % | 24 hr. Immersion; ASTM D570 |
Linear Mold Shrinkage | 0.0010 cm/cm | 0.0010 in/in | ASTM D955 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength, Ultimate | 200 MPa | 29000 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
Elongation at Break | 2.0 % | 2.0 % | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
Flexural Modulus | 11.7 GPa | 1700 ksi | ASTM D790 |
Izod Impact, Notched | 1.55 J/cm @Thickness 6.35 mm, Temperature 23.0 °C | 2.90 ft-lb/in @Thickness 0.250 in, Temperature 73.4 °F | Method A, Injection Molded; ASTM D256 |
Thermal Properties | Metric | English | Comments |
Melting Point | 215 °C | 419 °F | ASTM D789 |
Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F | Annealed, 0.125 in bars; ASTM D648 |