- 拉伸强度 [MPa]: 5.38
- 透光率 [%]: 90.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.900 g/cc | 0.900 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.026 cm/cm | 0.026 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 36 | 36 | Instant; ASTM D2240 |
| Tensile Strength, Yield | 5.38 MPa | 780 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 2.28 MPa @Strain 300 % | 330 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 700 % | 700 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 21.9 kN/m | 125 pli | Die C (graves), 20 in/min; ASTM D624 |
| Compression Set | 21 % | 21 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |
| Optical Properties | Metric | English | Comments |
| Transmission, Visible | 90.0 % | 90.0 % | transparent; thickness not quantified |