- 拉伸强度 [MPa]: 3.52
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.00 g/cc | 1.00 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.0070 cm/cm | 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 32 | 32 | Instant; ASTM D2240 |
| Tensile Strength, Yield | 3.52 MPa | 510 psi | Method A (Dumbbell & Section), 20 in/min, Break; ASTM D412 |
| 2.21 MPa @Strain 300 % | 320 psi @Strain 300 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 | |
| Elongation at Break | 425 % | 425 % | Method A (Dumbbell & Section), 20 in/min; ASTM D412 |
| Tear Strength | 10.5 kN/m | 60.0 pli | Die C (graves), 20 in/min; ASTM D624 |
| Compression Set | 15 % | 15 % | Method B, 73°F(23°C), 22 hrs; ASTM D395 |