- 密度 [g/cm3]: 1.1
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.10 g/cc | 0.0397 lb/in³ | DIN EN ISO 1183-1:2004 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore A | 60 | 60 | DIN 53505 / ISO 868 | ||
Tensile Strength at Break | 4.20 MPa | 609 psi | Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37 | ||
Elongation at Break | 530 % | 530 % | Deviating from ISO 37 standard test piece S2 is tested with a traverse speed of 200 mm/min; DIN 53504 / ISO 37 | ||
Peel Strength | 5.00 kN/m | 28.5 pli | to PBT; Renault test D41 1916 | ||
12.0 kN/m | 68.5 pli | to ABS; Renault test D41 1916 | |||
16.0 kN/m | 91.3 pli | to PC; Renault test D41 1916 | |||
Graves Tear Strength | 15.0 kN/m | 85.6 pli | DIN ISO 34-1 Method B (b) | ||
Thermal Properties | Metric | English | Comments | ||
Flammability, UL94 | HB | HB | |||
Processing Properties | Metric | English | Comments | ||
Processing Temperature | 180 - 240 °C | 356 - 464 °F | adhesion to engineering thermoplastics | ||
Mold Temperature | 40.0 - 60.0 °C | 104 - 140 °F | |||
Drying Temperature | 60.0 - 80.0 °C @Time 7200 - 14400 sec | 140 - 176 °F @Time 2.00 - 4.00 hour | Pre drying | ||
Descriptive Properties | |||||
Color | Black |