Alliance Polymers Viprene™ P70A-22U-NAT Thermoplastic Vulcanizate Elastomer

Alliance Polymers Viprene™ P70A-22U-NAT Thermoplastic Vulcanizate Elastomer 物性表: Alliance Polymers Viprene™ P70A-22U-NAT Thermoplastic Vulcanizate Elastomer物性表及特性介绍,Alliance Polymers Viprene™ P70A-22U-NAT Thermoplastic Vulcanizate Elastomer注塑参数详情,如需Alliance Polymers Viprene™ P70A-22U-NAT Thermoplastic Vulcanizate Elastomer下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.97
  • 脆化温度 [℃]: -60.0
 
Physical PropertiesMetricEnglishComments
Density 0.970 g/cc0.0350 lb/in³ISO 2781
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore A 70.070.0ISO 868
Tensile Strength at Break 7.58 MPa1100 psiISO 37
Tensile Stress  2.70 MPa
@Strain 100 %
392 psi
@Strain 100 %
ISO 37
 4.00 MPa
@Strain 300 %
580 psi
@Strain 300 %
ISO 37
Elongation at Break 550 %550 %ISO 37
Tear Strength 43.8 kN/m250 pliISO 34-1
Compression Set 25.0 %
@Temperature 70.0 °C,
Time 79200 sec
25.0 %
@Temperature 158 °F,
Time 22.0 hour
ASTM D3995B
 
Thermal PropertiesMetricEnglishComments
Brittleness Temperature -60.0 °C-76.0 °FASTM D746
Flammability, UL94  HB
@Thickness 1.00 mm
HB
@Thickness 0.0394 in
 HB
@Thickness 1.50 mm
HB
@Thickness 0.0591 in
 HB
@Thickness 3.00 mm
HB
@Thickness 0.118 in
 
Processing PropertiesMetricEnglishComments
Processing Temperature 195 °C383 °FGate Temperature; Extrusion
 190 - 230 °C374 - 446 °FInjection
Rear Barrel Temperature 180 °C356 °FInjection
Middle Barrel Temperature 185 °C365 °FInjection
Front Barrel Temperature 185 °C365 °FInjection
Nozzle Temperature 190 - 220 °C374 - 428 °FInjection
Zone 1 180 °C356 °FExtrusion
Zone 2 185 °C365 °FExtrusion
Zone 3 185 °C365 °FExtrusion
Die Temperature 200 °C
@Pressure 4.80 - 17.0 MPa
392 °F
@Pressure 696 - 2470 psi
Extrusion
Mold Temperature 10.0 - 50.0 °C50.0 - 122 °FInjection
Injection Velocity >= 50.0 mm/sec>= 1.97 in/secInjection
Drying Temperature 80.0 °C176 °FInjection
 80.0 °C176 °FExtrusion
Dry Time 3.00 hour3.00 hourInjection
 3.00 hour3.00 hourExtrusion
Back Pressure 0.500 - 0.848 MPa72.5 - 123 psiInjection
Clamp Pressure 40.0 - 70.3 MPa5800 - 10200 psiInjection
Screw Speed 100 - 200 rpm100 - 200 rpmInjection

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49595.html

免责声明: 本文 Alliance Polymers Viprene™ P70A-22U-NAT Thermoplastic Vulcanizate Elastomer 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4