| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.09 g/cc | 1.09 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 52 | 52 | 10 sec; ASTM D2240 | ||
| Tensile Strength at Break | 24.0 MPa | 3480 psi | ASTM D412 | ||
| Elongation at Break | 200 % | 200 % | ASTM D412 | ||
| Tear Strength | 24.5 kN/m | 140 pli | ASTM D412 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 4.04 | 4.04 | ASTM D150 | ||
| Dielectric Strength | 22.4 kV/mm | 569 kV/in | ASTM D149 | ||
| 22.4 kV/mm @Frequency 100 Hz | 569 kV/in @Frequency 100 Hz | ASTM D149 | |||
| Thermal Properties | Metric | English | Comments | ||
| Flammability, UL94 | HB | HB | |||
| Processing Properties | Metric | English | Comments | ||
| Rear Barrel Temperature | 230 °C | 446 °F | |||
| Middle Barrel Temperature | 240 °C | 464 °F | |||
| Front Barrel Temperature | 250 °C | 482 °F | |||
| Nozzle Temperature | 260 °C | 500 °F | |||
| Zone 1 | 210 °C | 410 °F | |||
| Zone 2 | 220 °C | 428 °F | |||
| Zone 3 | 220 °C | 428 °F | |||
| Zone 4 | 220 °C | 428 °F | |||
| Zone 5 | 220 °C | 428 °F | |||
| Die Temperature | 230 °C | 446 °F | |||
| Melt Temperature | 235 °C | 455 °F | |||
| Mold Temperature | 10.0 - 30.0 °C | 50.0 - 86.0 °F | |||
| Drying Temperature | 80.0 °C | 176 °F | |||
| Dry Time | 2 - 4 hour | 2 - 4 hour | |||
| Descriptive Properties | |||||
| Injection Rate | Fast | ||||
