- 吸水率 [%]: 0.1
- 缺口冲击强度: 0.21
- 断裂伸长率 [%]: 141
- 弯曲模量 [MPa]: 9.79
- 硬度: 121.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.51 g/cc | 1.51 g/cc | ASTM D792 |
| Water Absorption | 0.10 % | 0.10 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 0.58 % | 0.58 % | ASTM D 570(2) |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 121 | 121 | ASTM D785 |
| Tensile Strength | 101 MPa | 14700 psi | ASTM D638 |
| Elongation at Break | 1.5 % | 1.5 % | ASTM D638 |
| Tensile Modulus | 10.3 GPa | 1500 ksi | ASTM D638 |
| Flexural Yield Strength | 141 MPa | 20500 psi | ASTM D790 |
| Flexural Modulus | 9.79 GPa | 1420 ksi | ASTM D790 |
| Compressive Strength | 168 MPa | 24400 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 7.58 GPa | 1100 ksi | ASTM D695 |
| Shear Strength | 83 MPa | 12000 psi | ASTM D732 |
| Izod Impact, Notched | 0.21 J/cm | 0.40 ft-lb/in | ASTM D256 Type A |
| Electrical Properties | Metric | English | Comments |
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | ASTM D257 |
| Dielectric Constant | 3.37 @Frequency 1.00e+6 Hz | 3.37 @Frequency 1.00e+6 Hz | ASTM D150 |
| Dielectric Strength | 14.3 kV/mm | 362 kV/in | Short Term; ASTM D149 |
| Dissipation Factor | 0.0070 @Frequency 1.00e+6 Hz | 0.0070 @Frequency 1.00e+6 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 19.8 µm/m-°C @Temperature -40.0 - 150 °C | 11.0 µin/in-°F @Temperature -40.0 - 302 °F | ASTM E831 |
| Thermal Conductivity | 0.249 W/m-K | 1.73 BTU-in/hr-ft²-°F | |
| Melting Point | 335 °C | 635 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 249 °C | 480 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ASTM D648 |
| Compliance Properties | Metric | English | Comments |
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No | |
| Chemical Resistance Properties | Metric | English | Comments |
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable | |