- 密度 [g/cm3]: 1.32
- 吸水率 [%]: 0.1
- 缺口冲击强度: 0.641
- 拉伸强度 [MPa]: 94.975
- 弯曲模量 [MPa]: 4.10
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.30 g/cc | 1.30 g/cc | ASTM D792 |
| Density | 1.32 g/cc | 0.0477 lb/in³ | ASTM D792 |
| Water Absorption at Saturation | 0.10 % @Temperature 22.8 °C, Time 86400 sec | 0.10 % @Temperature 73.0 °F, Time 24.0 hour | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 99 | 99 | ASTM D785 |
| Tensile Strength, Yield | 94.975 MPa @Temperature 22.8 °C | 13775 psi @Temperature 73.0 °F | ASTM D638 |
| Elongation at Break | 25 % | 25 % | ASTM D638 |
| Tensile Modulus | 3.00 GPa @Temperature 22.8 °C | 435 ksi @Temperature 73.0 °F | 1% Secant; ASTM D638 |
| Flexural Strength | 186 MPa @Temperature 22.8 °C | 27000 psi @Temperature 73.0 °F | ASTM D790 |
| Flexural Modulus | 4.10 GPa @Temperature 22.8 °C | 595 ksi @Temperature 73.0 °F | ASTM D790 |
| Compressive Strength | 117 MPa @Temperature 22.8 °C | 16900 psi @Temperature 73.0 °F | ASTM D695 |
| Shear Strength | 51.7 MPa @Temperature 22.8 °C | 7500 psi @Temperature 73.0 °F | Ultimate; ASTM D3846 |
| Izod Impact, Notched | 0.641 J/cm @Temperature 22.8 °C | 1.20 ft-lb/in @Temperature 73.0 °F | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D149 |
| Surface Resistivity per Square | 1.00e+16 ohm | 1.00e+16 ohm | ASTM D257 |
| Dielectric Strength | 7.87 kV/mm | 200 kV/in | ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 46.8 µm/m-°C | 26.0 µin/in-°F | ASTM D696 |
| Melting Point | 340 °C | 644 °F | |
| Maximum Service Temperature, Air | 260 °C | 500 °F | continuous |
| Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | |