- 密度 [g/cm3]: 1.43
- 吸水率 [%]: 0.05
- 缺口冲击强度: 0.55
- 弯曲模量 [MPa]: 11.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.43 g/cc | 0.0517 lb/in³ | ASTM D792 | ||
| Filler Content | 30 % | 30 % | |||
| Water Absorption | 0.050 % @Time 86400 sec | 0.050 % @Time 24.0 hour | ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 102 | 102 | ASTM D785 | ||
| Hardness, Shore D | 93 | 93 | ASTM D2240 | ||
| Tensile Strength | 126 MPa | 18300 psi | ASTM D638 | ||
| Elongation at Break | 1.7 % | 1.7 % | Flexural Strain; ASTM D790 | ||
| 2.2 % | 2.2 % | ASTM D638 | |||
| Tensile Modulus | 9.65 GPa | 1400 ksi | ASTM D638 | ||
| Flexural Strength | 210 MPa | 30500 psi | ASTM D790 | ||
| Flexural Modulus | 11.0 GPa | 1600 ksi | ASTM D790 | ||
| Compressive Strength | <= 179 MPa | <= 26000 psi | ASTM D695 | ||
| Compressive Modulus | 4.14 GPa | 600 ksi | ASTM D695 | ||
| Shear Strength | 83.4 MPa | 12100 psi | ASTM D732 | ||
| Izod Impact, Notched | 0.550 J/cm | 1.03 ft-lb/in | ASTM D256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Surface Resistance | <= 10000 ohm | <= 10000 ohm | ASTM D257 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 28.4 µm/m-°C | 15.8 µin/in-°F | ASTM E831 | ||
| Melting Point | 343 °C | 649 °F | DSC | ||
| Heat Distortion Temperature | >= 237 °C | >= 459 °F | ASTM D648 | ||
| Descriptive Properties | |||||
| Color | Black | ||||