Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite物性表参数

Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite

Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite 物性表: Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite物性表及特性介绍,Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite注塑参数详情,如需Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite下载, 可到相关下载区下载

密度 [g/cm3]: 1.36
弯曲模量 [MPa]: 8.27

Physical Properties	Metric	English	Comments

Density	1.36 g/cc	0.0491 lb/in³	ASTM D792
Filler Content	15 %	15 %
Crystallinity	21 %	21 %

Mechanical Properties	Metric	English	Comments
Tensile Strength	91.7 MPa	13300 psi	ASTM D638
Elongation at Break	1.6 %	1.6 %	ASTM D638
Flexural Strength	166 MPa	24100 psi	ASTM D790
Flexural Modulus	8.27 GPa	1200 ksi	ASTM D790
Compressive Strength	169 MPa	24500 psi	10% Deformation; ASTM D695
Compressive Modulus	3.03 GPa	440 ksi	ASTM D695

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Black

关键词:
PEEK
供应
Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound
10% Carbon Fiber with 5% Graphite

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49820.html

免责声明: 本文 Ensinger Tecapeek® XP-119G Compression Molded PEEK Compound, 10% Carbon Fiber with 5% Graphite 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络