Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing物性表参数

Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing

Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing 物性表: Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing物性表及特性介绍,Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing注塑参数详情,如需Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing下载, 可到相关下载区下载

弯曲模量 [MPa]: 14.0

Physical Properties	Metric	English	Comments

Specific Gravity	1.40 g/cc	1.40 g/cc	ISO 1183
Water Absorption	<= 0.10 %	<= 0.10 %	23°C/24h
Linear Mold Shrinkage	0.0020 - 0.0060 cm/cm	0.0020 - 0.0060 in/in

Mechanical Properties	Metric	English	Comments
Tensile Stress	175 MPa	25400 psi
Elongation at Yield	2.0 %	2.0 %
	2.5 %	2.5 %	flexural
Modulus of Elasticity	16.0 GPa	2320 ksi
Flexural Strength	255 MPa	37000 psi
Flexural Modulus	14.0 GPa	2030 ksi
Charpy Impact Unnotched	3.20 J/cm²	15.2 ft-lb/in²	edgewise; ISO 179 1eU

Electrical Properties	Metric	English	Comments
Surface Resistance	<= 1.00e+6 ohm	<= 1.00e+6 ohm
Insulation Resistance	1.00e+6 ohm	1.00e+6 ohm

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	250 °C	482 °F
	280 °C	536 °F	short term

Processing Properties	Metric	English	Comments
Processing Temperature	390 °C	734 °F	mass temp
Nozzle Temperature	360 - 380 °C	680 - 716 °F
Zone 1	360 - 370 °C	680 - 698 °F
Zone 2	380 - 390 °C	716 - 734 °F
Zone 3	390 - 400 °C	734 - 752 °F
Mold Temperature	170 - 200 °C	338 - 392 °F
Drying Temperature	120 °C @Time 21600 - 28800 sec	248 °F @Time 6.00 - 8.00 hour	or
	150 °C @Time 10800 - 21600 sec	302 °F @Time 3.00 - 6.00 hour	Dehumidifying dryer

Descriptive Properties
Color	natural color (black)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49989.html

免责声明: 本文 Lehmann & Voss LUVOCOM® 1105-8004 PEEK, with carbon fiber, low-warpage, easy flowing 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络