应力痕,龟裂,甚至开裂。
原料图
PC/ABS,聚碳酸酯和丙烯腈-丁二烯-苯乙烯共聚物和混合物,是由聚碳酸酯(Polycarbonate)和聚丙烯腈(ABS)合金而成的热可塑性塑胶,结合了两种材料的优异特性,ABS材料的成型性和PC的机械性、冲击强度和耐温、抗紫外线(UV)等性质,可广泛使用在汽车内部零件、事务机器、通信器材、家电用品及照明设备上。
典型应用范围:
汽车内外饰:仪表板,饰柱,仪表前盖,格栅,内外饰件 2.商务设备机壳和内置部件:笔记本/台式电脑,复印机,打印机,绘图仪,显示器 3.电信,移动电话外壳,附件以及智能卡(SIM卡): 4.电器产品,电子产品外壳,电表罩和壳体,家用开关,插头和插座,电缆电线管道 5.家用电器,如洗衣机,吹风机,微波炉内外部件等。
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.09 g/cc | 0.0394 lb/in³ | |
Water Absorption | 0.70 % | 0.70 % | |
Melt Flow | 7.0 g/10 min @Load 5.00 kg, Temperature 260 °C |
7.0 g/10 min @Load 11.0 lb, Temperature 500 °F |
cm³/10 min |
Mechanical Properties | Metric | English | Comments |
Tensile Strength, Yield | 45.0 MPa | 6530 psi | 50 mm/min |
Elongation at Break | >= 50 % | >= 50 % | Nominal strain at break (50 mm/min) |
Elongation at Yield | 5.0 % | 5.0 % | 50 mm/min |
Tensile Modulus | 2.00 GPa | 290 ksi | 1 mm/min |
Izod Impact, Unnotched | NB | NB | |
NB @Temperature -30.0 °C |
NB @Temperature -22.0 °F |
||
Izod Impact, Notched (ISO) | 23.0 kJ/m² @Temperature -30.0 °C |
10.9 ft-lb/in² @Temperature -22.0 °F |
|
Electrical Properties | Metric | English | Comments |
Electrical Resistivity | >= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | |
Surface Resistance | 1.00e+14 ohm | 1.00e+14 ohm | |
Dielectric Constant | 2.7 @Frequency 1e+6 Hz |
2.7 @Frequency 1e+6 Hz |
|
2.8 @Frequency 100 Hz |
2.8 @Frequency 100 Hz |
||
Dielectric Strength | 27.0 kV/mm | 686 kV/in | |
Dissipation Factor | 0.0040 @Frequency 100 Hz |
0.0040 @Frequency 100 Hz |
|
0.0070 @Frequency 1e+6 Hz |
0.0070 @Frequency 1e+6 Hz |
||
Comparative Tracking Index | 300 V | 300 V | |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 80.0 µm/m-°C @Temperature 20.0 °C |
44.4 µin/in-°F @Temperature 68.0 °F |
|
Deflection Temperature at 0.46 MPa (66 psi) | 125 °C | 257 °F | |
Deflection Temperature at 1.8 MPa (264 psi) | 100 °C | 212 °F | |
Vicat Softening Point | 120 °C | 248 °F | 50°C/hr; 50N |
Flammability, UL94 | HB @Thickness 1.60 mm |
HB @Thickness 0.0630 in |
上海松翰塑化科技有限公司,供应原料,品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询:
联系人: 夏先生
手 机:13501802636 021 51131842
QQ :205730283
邮 箱 :205730283@qq.com