图述材料注意事项：
特征：
UL V-0 @ 3.2mm
出色的平衡性能
高耐热性
好正常的低温冲击强度
良好的表面
应用：
家用小电器柜
控制器
插座
电表外壳
如图
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.12 g/cc @Temperature 23.0 °C |
1.12 g/cc @Temperature 73.4 °F |
ASTM D792 | ||
| Water Absorption | 0.15 % @Temperature 23.0 °C, Time 86400 sec |
0.15 % @Temperature 73.4 °F, Time 24.0 hour |
ASTM D570 | ||
| Linear Mold Shrinkage | 0.0040 - 0.0060 cm/cm @Temperature 23.0 °C |
0.0040 - 0.0060 in/in @Temperature 73.4 °F |
ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 114 | 114 | ASTM D785 | ||
| Tensile Strength at Break | 50.0 MPa | 7250 psi | 50mm/min; ASTM D638 | ||
| Elongation at Break | >= 30 % | >= 30 % | 50mm/min; ASTM D638 | ||
| Flexural Strength | 85.0 MPa | 12300 psi | 2mm/min; ASTM D790 | ||
| Flexural Modulus | 2.30 GPa | 334 ksi | 2mm/min; ASTM D790 | ||
| Izod Impact, Notched | >= 2.50 J/cm @Thickness 3.20 mm, Temperature -30.0 °C |
>= 4.68 ft-lb/in @Thickness 0.126 in, Temperature -22.0 °F |
ASTM D256 | ||
| >= 3.40 J/cm @Thickness 3.20 mm, Temperature 23.0 °C |
>= 6.37 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F |
ASTM D256 | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 | ||
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | ASTM D257 | ||
| Dielectric Strength | 28.0 kV/mm | 711 kV/in | 1.6mm; ASTM D149 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 80.0 µm/m-°C | 44.4 µin/in-°F | ASTM D696 | ||
| Hot Ball Pressure Test | 118 - 122 °C @Thickness 2.00 mm |
244 - 252 °F @Thickness 0.0787 in |
IEC695-10-2 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 120 °C @Thickness 6.40 mm |
248 °F @Thickness 0.252 in |
ASTM D648 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 105 °C @Thickness 6.40 mm |
221 °F @Thickness 0.252 in |
ASTM D648 | ||
| Flammability, UL94 | V-0 @Thickness 3.20 mm |
V-0 @Thickness 0.126 in |
|||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | <= 260 °C | <= 500 °F | |||
| Rear Barrel Temperature | 210 - 230 °C | 410 - 446 °F | Start Point: 215°C | ||
| Middle Barrel Temperature | 220 - 230 °C | 428 - 446 °F | Start Point: 225°C | ||
| Front Barrel Temperature | 220 - 240 °C | 428 - 464 °F | Start Point: 235°C | ||
| Melt Temperature | 220 - 240 °C | 428 - 464 °F | Start Point: 230°C | ||
| Mold Temperature | 60.0 - 100 °C | 140 - 212 °F | Start Point: 70°C | ||
| Drying Temperature | 90.0 - 100 °C @Time 10800 - 21600 sec |
194 - 212 °F @Time 3.00 - 6.00 hour |
Pre-dry | ||
| Back Pressure | 0.000 - 1.00 MPa | 0.000 - 145 psi | |||
| De |
|||||
| Hot Wire Test (°C) | 850 | IEC695-2-12, 1.6mm | |||
| Injection Speed | 60-90% | ||||
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636 021 51131842
QQ ：205730283
邮 箱 ：205730283@qq.com