典型：
1.汽车内外饰：仪表板，饰柱，仪表前盖，格栅，内外饰件
2.商务设备机壳和内置部件：笔记本/台式电脑，复印机，打印机，绘图仪，显示器
3.电信，移动电话外壳，附件以及智能卡（SIM卡）：
4.电器产品，电子产品外壳，电表罩和壳体，家用开关，插头和插座，电缆电线管道
5.家用电器，如洗衣机，吹风机，微波炉内外部件
如图
| 参数： | |||
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.10 g/cc | 1.10 g/cc | ASTM D792 |
| Maximum Moisture Content | 0.020 | 0.020 | Injection Molding |
| Linear Mold Shrinkage, Flow | 0.0050 - 0.0080 cm/cm @Thickness 3.20 mm |
0.0050 - 0.0080 in/in @Thickness 0.126 in |
ASTM D955 |
| Melt Flow | 2.0 g/10 min @Load 2.16 kg, Temperature 250 °C |
2.0 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 39.2 MPa @Thickness 3.20 mm |
5690 psi @Thickness 0.126 in |
50mm/min; ASTM D638 |
| Flexural Yield Strength | 59.8 MPa @Thickness 3.20 mm |
8680 psi @Thickness 0.126 in |
10mm/min; ASTM D790 |
| Flexural Modulus | 1.67 GPa @Thickness 3.20 mm |
242 ksi @Thickness 0.126 in |
10mm/min; ASTM D790 |
| Izod Impact, Notched | >= 4.51 J/cm @Thickness 3.20 mm, Temperature 23.0 °C |
>= 8.45 ft-lb/in @Thickness 0.126 in, Temperature 73.4 °F |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 91.0 °C @Thickness 6.40 mm |
196 °F @Thickness 0.252 in |
Unannealed; ASTM D648 |
| Processing Properties | Metric | English | Comments |
| Rear Barrel Temperature | 230 - 250 °C | 446 - 482 °F | Injection Molding |
| Middle Barrel Temperature | 235 - 255 °C | 455 - 491 °F | Injection Molding |
| Front Barrel Temperature | 235 - 255 °C | 455 - 491 °F | Injection Molding |
| Nozzle Temperature | 235 - 255 °C | 455 - 491 °F | Injection Molding |
| Melt Temperature | 235 - 250 °C | 455 - 482 °F | Injection Molding |
| Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | Injection Molding |
| Drying Temperature | 80.0 - 100 °C | 176 - 212 °F | Injection Molding |
| Dry Time | 4.00 - 6.00 hour | 4.00 - 6.00 hour | Injection Molding |
| Screw Speed | 40 - 70 rpm | 40 - 70 rpm | Injection Molding |
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636 021 51131842
QQ ：205730283
邮 箱 ：205730283@qq.com