生产类别：热塑性聚合物；聚合物；ABS；PC / ABS +不锈钢；聚碳酸酯（PC）
PTS PCA-2008 PC/ABS 原材料内颗粒图：
PTS PCA-2008 PC/ABS 原材料概述：
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 - 1.52 g/cc | 0.0430 - 0.0549 lb/in³ | Average value: 1.32 g/cc Grade Count:7 |
| Filler Content | 5.00 - 20.0 % | 5.00 - 20.0 % | Average value: 9.40 % Grade Count:5 |
| Water Absorption | 0.100 - 0.120 % | 0.100 - 0.120 % | Average value: 0.107 % Grade Count:6 |
| Linear Mold Shrinkage | 0.00100 - 0.0100 cm/cm | 0.00100 - 0.0100 in/in | Average value: 0.00508 cm/cm Grade Count:6 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 51.7 - 62.1 MPa | 7500 - 9000 psi | Average value: 60.0 MPa Grade Count:5 |
| Elongation at Break | 2.00 - 10.0 % | 2.00 - 10.0 % | Average value: 5.42 % Grade Count:6 |
| Modulus of Elasticity | 2.69 - 3.10 GPa | 390 - 450 ksi | Average value: 2.91 GPa Grade Count:5 |
| Flexural Yield Strength | 82.7 - 134 MPa | 12000 - 19500 psi | Average value: 102 MPa Grade Count:7 |
| Flexural Modulus | 2.34 - 3.79 GPa | 340 - 550 ksi | Average value: 3.04 GPa Grade Count:7 |
| Izod Impact, Notched | 0.427 - 5.87 J/cm | 0.800 - 11.0 ft-lb/in | Average value: 1.43 J/cm Grade Count:7 |
| Izod Impact, Unnotched | 2.14 - 10.7 J/cm | 4.00 - 20.0 ft-lb/in | Average value: 6.83 J/cm Grade Count:5 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00 - 10000 ohm-cm | 1.00 - 10000 ohm-cm | Average value: 1690 ohm-cm Grade Count:7 |
| Surface Resistance | 1.00 - 1.00e+6 ohm | 1.00 - 1.00e+6 ohm | Average value: 668000 ohm Grade Count:6 |
| Static Decay | 0.100 - 2.00 sec | 0.100 - 2.00 sec | Average value: 1.68 sec Grade Count:6 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 104 - 116 °C | 220 - 240 °F | Average value: 111 °C Grade Count:5 |
| Flammability, UL94 | HB - V-0 | HB - V-0 | Grade Count:5 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 232 - 266 °C | 450 - 510 °F | Average value: 249 °C Grade Count:5 |
| Mold Temperature | 51.7 - 93.3 °C | 125 - 200 °F | Average value: 72.5 °C Grade Count:5 |
| Injection Pressure | 68.9 - 103 MPa | 10000 - 15000 psi | Average value: 86.2 MPa Grade Count:5 |
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！可提供以下报告：COA（产地证明）SGS（检测报告） MSDS（成分报告） FDA（食品安全报告） UL黄卡(出口报告)正规17%的正规发票！欢迎新老客户来电咨询：
联系人：邓小姐
联系电话：13917657923
固定电话：021-51131842
联系QQ：996152797
联系信箱：996152797@qq.com