沙伯 PC/ABS CY6310 阻燃_产品资讯

沙伯 PC/ABS CY6310 是一种最广泛使用的工业热塑性塑料。PC/ABS 提供最理想的性能PC优越的强度和耐热性能和ABS的灵活性。

特点：

　1、综合性能较好，冲击强度较高，化学稳定性，电性能良好.

　　2、与372有机玻璃的熔接性良好，制成双色塑件，且可表面镀铬，喷漆处理.

　　3、有高抗冲、高耐热、阻燃、增强、透明等级别。

　　4、流动性比HIPS差一点，比PMMA、PC等好，柔韧性好。

　　5、用途：适于制作一般机械零件，减磨耐磨零件，传动零件和电讯零件.

　　6、同PVC（聚氯乙烯）一样在屈折处会出现白化现象。

典型应用范围:

汽车内外饰：仪表板，饰柱，仪表前盖，格栅，内外饰件　2.商务设备机壳和内置部件：笔记本/台式电脑，复印机，打印机，绘图仪，显示器　3.电信，移动电话外壳，附件以及智能卡（SIM卡）：　4.电器产品，电子产品外壳，电表罩和壳体，家用开关，插头和插座，电缆电线管道　5.家用电器，如洗衣机，吹风机，微波炉内外部件等。

Physical Properties	Metric	English	Comments
物性表：
Specific Gravity	1.16 g/cc	1.16 g/cc	ASTM D792
Density	1.16 g/cc	0.0419 lb/in³	ISO 1183
Moisture Absorption	0.200 %	0.200 %	23°C / 50% RH; ISO 62
Water Absorption at Saturation	0.60 %	0.60 %	ISO 62
Linear Mold Shrinkage, Flow	0.0040 - 0.0060 cm/cm @Thickness 3.20 mm	0.0040 - 0.0060 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	16 g/10 min @Load 2.16 kg, Temperature 250 °C	16 g/10 min @Load 4.76 lb, Temperature 482 °F	ASTM D1238
	20 g/10 min @Load 2.16 kg, Temperature 260 °C	20 g/10 min @Load 4.76 lb, Temperature 500 °F	ASTM D1238
Melt Index of Compound	19 g/10 min @Load 2.16 kg, Temperature 260 °C	19 g/10 min @Load 4.76 lb, Temperature 500 °F	MVR [cm^3/10 min]; ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	50.0 MPa	7250 psi	Type I, 50 mm/min; ASTM D638
	51.0 MPa	7400 psi	50 mm/min; ISO 527
Tensile Strength, Yield	63.0 MPa	9140 psi	Type I, 50 mm/min; ASTM D638
	63.0 MPa	9140 psi	50 mm/min; ISO 527
Elongation at Break	>= 50 %	>= 50 %	Type I, 50 mm/min; ASTM D638
	>= 50 %	>= 50 %	50 mm/min; ISO 527
Elongation at Yield	4.2 %	4.2 %	Type I, 50 mm/min; ASTM D638
	4.4 %	4.4 %	50 mm/min; ISO 527
Tensile Modulus	2.70 GPa	392 ksi	5 mm/min; ASTM D638
	2.70 GPa	392 ksi	1 mm/min; ISO 527
Flexural Yield Strength	91.0 MPa	13200 psi	2 mm/min; ISO 178
	101 MPa	14600 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	2.65 GPa	384 ksi	2 mm/min; ISO 178
	2.70 GPa	392 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched	6.00 J/cm	11.2 ft-lb/in	ASTM D256
	1.15 J/cm @Temperature -30.0 °C	2.15 ft-lb/in @Temperature -22.0 °F	ASTM D256
Izod Impact, Notched (ISO)	50.0 kJ/m²	23.8 ft-lb/in²	80103; ISO 180/1A
	13.0 kJ/m² @Temperature -30.0 °C	6.19 ft-lb/in² @Temperature -22.0 °F	80103; ISO 180/1A
Izod Impact, Unnotched (ISO)	NB	NB	80103; ISO 180/1U
Charpy Impact Unnotched	NB	NB	Edgew 80103 sp=62mm; ISO 179/1eU
Charpy Impact, Notched	5.50 J/cm²	26.2 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eA
	1.40 J/cm² @Temperature -30.0 °C	6.66 ft-lb/in² @Temperature -22.0 °F	Edgew 80103 sp=62mm; ISO 179/1eA
Dart Drop, Total Energy	65.0 J @Temperature 23.0 °C	47.9 ft-lb @Temperature 73.4 °F	ASTM D3763
Impact Test	105 J	77.4 ft-lb	Multiaxial Impact; ISO 6603

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	ROA; IEC 60093
Comparative Tracking Index	575 V	575 V	IEC 60112
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
High Amp Arc Ignition, HAI	>= 120 arcs	>= 120 arcs	UL 746A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	68.0 µm/m-°C @Temperature -40.0 - 40.0 °C	37.8 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
	68.0 µm/m-°C @Temperature -40.0 - 40.0 °C	37.8 µin/in-°F @Temperature -40.0 - 104 °F	ISO 11359-2
CTE, linear, Transverse to Flow	70.0 µm/m-°C @Temperature -40.0 - 40.0 °C	38.9 µin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
	70.0 µm/m-°C @Temperature -40.0 - 40.0 °C	38.9 µin/in-°F @Temperature -40.0 - 104 °F	ISO 11359-2
Hot Ball Pressure Test	<= 95.0 °C	<= 203 °F	IEC 60695-10-2
Deflection Temperature at 0.46 MPa (66 psi)	100 °C @Thickness 3.20 mm	212 °F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	90.0 °C	194 °F	Flatw 80104 sp=64mm; ISO 75/Af
	88.0 °C @Thickness 3.20 mm	190 °F @Thickness 0.126 in	unannealed; ASTM D648
Vicat Softening Point	109 °C	228 °F	Rate B/50; ASTM D1525
	109 °C	228 °F	Rate B/50; ISO 306
	111 °C	232 °F	Rate B/120; ISO 306
UL RTI, Electrical	85.0 °C	185 °F	UL 746B
UL RTI, Mechanical with Impact	85.0 °C	185 °F	UL 746B
UL RTI, Mechanical without Impact	85.0 °C	185 °F	UL 746B
Flammability, UL94	V-2 @Thickness 0.750 mm	V-2 @Thickness 0.0295 in	UL 94 by SABIC-IP
	V-2 @Thickness 0.750 mm	V-2 @Thickness 0.0295 in	UL 94
	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in	UL 94
	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in	UL 94 by SABIC-IP
	5VB @Thickness 2.30 mm	5VB @Thickness 0.0906 in	UL 94
	5VB @Thickness 2.30 mm	5VB @Thickness 0.0906 in	UL 94 by SABIC-IP
	5VA @Thickness 2.90 mm	5VA @Thickness 0.114 in	UL 94 by SABIC-IP
	5VA @Thickness 2.90 mm	5VA @Thickness 0.114 in	UL 94
Oxygen Index	30 %	30 %	ISO 4589
Glow Wire Test	960 °C @Thickness 3.00 mm	1760 °F @Thickness 0.118 in	IEC 60695-2-12

Descriptive Properties
Ball Pressure Test, 75°C +/- 2°C	Pass	IEC 60695-10-2

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com