PA66 A G5 FR PH1 25%玻璃纤维增强,阻燃、_产品资讯

PA66 A G5 FR PH1聚酰胺俗称尼龙（Nylon），英文名称Polyamide（简称PA），是分子主链上含有重复酰胺基团—[NHCO]—的热塑性树脂总称。包括脂肪族PA，脂肪—芳香族PA和芳香族PA。其中，脂肪族PA品种多，产量大，应用广泛，其命名由合成单体具体的碳原子数而定。

颗粒图：

用途：

广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、体育休闲用品、油管、油箱及一些精密工程制品。

电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座。

汽车：散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座。

工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com

物性表:

Physical Properties	Metric	English	Comments

Density	1.38 g/cc	0.0499 lb/in³	ASTM D792, ISO 1183
Water Absorption	0.80 %	0.80 %	23°C, 24h in H₂O; sim. ISO 62
Water Absorption at Saturation	5.5 %	5.5 %	sim. ISO 62
Linear Mold Shrinkage, Flow	0.0060 cm/cm	0.0060 in/in	parallel; Euronil
Linear Mold Shrinkage, Transverse	0.0080 cm/cm	0.0080 in/in	Euronil

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	150 MPa	21800 psi	ISO 527, ASTM D638
Elongation at Break	2.5 %	2.5 %
Tensile Modulus	9.00 GPa	1310 ksi	ISO 527, ASTM D638
Flexural Yield Strength	210 MPa	30500 psi	ISO 178, ASTM D790
	125 MPa @Temperature 90.0 °C	18100 psi @Temperature 194 °F	ISO 178, ASTM D790
Flexural Modulus	8.20 GPa	1190 ksi	ISO 178, ASTM D790
	4.30 GPa @Temperature 90.0 °C	624 ksi @Temperature 194 °F	ISO 178, ASTM D790
Izod Impact, Notched (ISO)	7.00 kJ/m² @Temperature -30.0 °C	3.33 ft-lb/in² @Temperature -22.0 °F	ISO 180/1A
	8.50 kJ/m² @Temperature 23.0 °C	4.04 ft-lb/in² @Temperature 73.4 °F	ISO 180/1A
Charpy Impact Unnotched	3.80 J/cm²	18.1 ft-lb/in²	ISO 179
	2.70 J/cm² @Temperature -30.0 °C	12.8 ft-lb/in² @Temperature -22.0 °F	ISO 179
Charpy Impact, Notched	0.700 J/cm²	3.33 ft-lb/in²	ISO 179
	0.500 J/cm² @Temperature -30.0 °C	2.38 ft-lb/in² @Temperature -22.0 °F	ISO 179

Electrical Properties	Metric	English	Comments
Dielectric Strength	20.0 kV/mm @Thickness 2.00 mm	508 kV/in @Thickness 0.0787 in	ASTM D149
Comparative Tracking Index	500 V @Thickness 3.20 mm	500 V @Thickness 0.126 in	Sol. A; IEC 112, UL 746A
	500 V @Thickness 3.20 mm	500 V @Thickness 0.126 in	Sol. B; IEC 112, UL 746A

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	120 °C	248 °F	20,000 hr; IEC 216
Deflection Temperature at 0.46 MPa (66 psi)	250 °C	482 °F	ISO 75, ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	245 °C	473 °F	ISO 75, ASTM D648
Vicat Softening Point	250 °C	482 °F	49 N; ISO 306, ASTM D1525
	255 °C	491 °F	9.8 N; ISO 306, ASTM D1525
Flammability, UL94	V-0 @Thickness 0.800 mm	V-0 @Thickness 0.0315 in
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in
	V-0 @Thickness 3.20 mm	V-0 @Thickness 0.126 in
Oxygen Index	29 %	29 %	ASTM D2863
Glow Wire Test	960 °C @Thickness 3.20 mm	1760 °F @Thickness 0.126 in	Glow Wire Flammability Index; IEC 694-2-12
	960 °C @Thickness 0.800 mm	1760 °F @Thickness 0.0315 in	Glow Wire Flammability Index; IEC 694-2-12

Processing Properties	Metric	English	Comments
Nozzle Temperature	275 - 285 °C	527 - 545 °F
Zone 1	260 - 280 °C	500 - 536 °F	hopper
Zone 2	260 - 280 °C	500 - 536 °F
Zone 3	270 - 280 °C	518 - 536 °F
Zone 4	275 - 285 °C	527 - 545 °F
Melt Temperature	275 - 290 °C	527 - 554 °F	Do not melt above 290°C
Mold Temperature	90.0 - 110 °C	194 - 230 °F	Preferred
Drying Temperature	80.0 - 85.0 °C	176 - 185 °F
Dry Time	4 hour	4 hour
Injection Pressure	70.0 - 100 MPa	10200 - 14500 psi

Descriptive Properties
Clamping Force	in tons, 0.7 times the projected surface area in cm²
Flammability Rating	SE	FMVSS No. 302, 355x100x1 mm
Heat Resistance - Ball Test	OK	at 125°C, IEC 309
	OK	at 165°C, IEC 309
Holding Pressure	90 MPa
Needle Test	OK	IEC 695-2-2, 1 or 2 mm