颗粒图：
、
、用途：
广泛应用于机械、仪器仪表、汽车部件、电子电气、铁路、家电、通讯、纺机、体育休闲用品、油管、油箱及一些精密工程制品。
电子电器：连接器、卷线轴、计时器、护盖断路器、开关壳座。
汽车： 散热风扇、门把、油箱盖、进气隔栅、水箱护盖、灯座。
工业零件：椅座、自行车输框、溜冰鞋底座、纺织梭、踏板、滑输。
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生
手 机：13501802636
QQ ：205730283
邮 箱 ：205730283@qq.com
物性表:
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.33 g/cc | 0.0480 lb/in³ | |||
| 1.51 g/cc | 0.0546 lb/in³ | DAM; ISO 1183 | |||
| Water Absorption | 4.9 % @Thickness 2.00 mm |
4.9 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 | ||
| Moisture Absorption | 1.50 % @Thickness 2.00 mm |
1.50 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 | ||
| Viscosity | 71583.5 cP @Shear Rate 5000 1/s, Temperature 280 °C |
71583.5 cP @Shear Rate 5000 1/s, Temperature 536 °F |
ISO 11403-1 -2 | ||
| 82185.5 cP @Shear Rate 5000 1/s, Temperature 270 °C |
82185.5 cP @Shear Rate 5000 1/s, Temperature 518 °F |
ISO 11403-1 -2 | |||
| 95324.2 cP @Shear Rate 5000 1/s, Temperature 260 °C |
95324.2 cP @Shear Rate 5000 1/s, Temperature 500 °F |
ISO 11403-1 -2 | |||
| 244406 cP @Shear Rate 500 1/s, Temperature 280 °C |
244406 cP @Shear Rate 500 1/s, Temperature 536 °F |
ISO 11403-1 -2 | |||
| 290480 cP @Shear Rate 500 1/s, Temperature 270 °C |
290480 cP @Shear Rate 500 1/s, Temperature 518 °F |
ISO 11403-1 -2 | |||
| 346677 cP @Shear Rate 500 1/s, Temperature 260 °C |
346677 cP @Shear Rate 500 1/s, Temperature 500 °F |
ISO 11403-1 -2 | |||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | DAM; ISO 294-4 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | DAM; ISO 294-4 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 145 MPa | 21000 psi | 50%RH; ISO 527-1/-2 | ||
| 215 MPa | 31200 psi | DAM; ISO 527-1/-2 | |||
| Elongation at Break | 3.0 % | 3.0 % | DAM; ISO 527-1/-2 | ||
| 5.0 % | 5.0 % | 50%RH; ISO 527-1/-2 | |||
| Tensile Modulus | 9.00 GPa | 1310 ksi | 50%RH; ISO 527-1/-2 | ||
| 14.2 GPa | 2060 ksi | DAM; ISO 527-1/-2 | |||
| Izod Impact, Notched (ISO) | 17.0 kJ/m² | 8.09 ft-lb/in² | DAM; ISO 180/1A | ||
| 22.0 kJ/m² | 10.5 ft-lb/in² | 50%RH; ISO 180/1A | |||
| Charpy Impact Unnotched | 10.0 J/cm² | 47.6 ft-lb/in² | DAM; ISO 179/1eU | ||
| 10.0 J/cm² | 47.6 ft-lb/in² | 50%RH; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.90 J/cm² | 9.04 ft-lb/in² | DAM; ISO 179/1eA | ||
| 2.40 J/cm² | 11.4 ft-lb/in² | 50%RH; ISO 179/1eA | |||
| Tensile Creep Modulus, 1 hour | 9400 MPa @Time 3600 sec |
1.36e+6 psi @Time 1.00 hour |
50%RH; ISO 899-1 | ||
| Tensile Creep Modulus, 1000 hours | 7300 MPa @Time 3.60e+6 sec |
1.06e+6 psi @Time 1000 hour |
50%RH; ISO 899-1 | ||
| Electrical Properties | Metric | English | Comments | ||
| Comparative Tracking Index | 500 V | 500 V | DAM; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| Specific Heat Capacity | 2.10 J/g-°C | 0.502 BTU/lb-°F | |||
| Thermal Conductivity | 0.260 W/m-K | 1.80 BTU-in/hr-ft²-°F | of melt | ||
| Melting Point | 221 °C | 430 °F | DAM; 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 218 °C | 424 °F | DAM; ISO 75-1/-2 | ||
| De |
|||||
| Additives | Release agent | ||||
| Delivery form | Pellets | ||||
| Part Marking Code | >PA6-GF45< | ISO 11469 | |||
| Processing | Injection Moulding | ||||
| Regional Availability | Asia Pacific | ||||
| Europe | |||||
| Global | |||||
| Near East/Africa | |||||
| North America | |||||
| South and Central America | |||||
| Resin Identification | PA6-GF45 | ||||