solarkote®铅丙烯酸_产品资讯

阿科玛集团solarkote®铅丙烯酸

类别：聚合物；热塑性塑料；丙烯酸（有机玻璃）

材料说明：对聚氯乙烯/丙烯酸合金
物性表：

Physical Properties	Metric	English	Comments

Specific Gravity	1.15 g/cc	1.15 g/cc	ASTM D792
Water Absorption	0.40 %	0.40 %	weight gain after 24 hr. immersion; ASTM D570
Melt Flow	2.0 g/10 min @Load 3.80 kg, Temperature 230 °C	2.0 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	38	38	ASTM D785
Tensile Strength, Ultimate	37.9 MPa	5500 psi	ASTM D638
Elongation at Break	50 %	50 %	ASTM D638
Tensile Modulus	1.81 GPa	263 ksi	ASTM D638
Flexural Strength	<= 55.2 MPa	<= 8000 psi	ASTM D790
Flexural Modulus	1.72 GPa	250 ksi	ASTM D790
Izod Impact, Notched	0.587 J/cm	1.10 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	99.0 µm/m-°C	55.0 µin/in-°F	ASTM E831
	68.4 µm/m-°C @Temperature -40.0 °C	38.0 µin/in-°F @Temperature -40.0 °F	ASTM E831
	82.8 µm/m-°C @Temperature -17.8 °C	46.0 µin/in-°F @Temperature 0.000 °F	ASTM E831
	113 µm/m-°C @Temperature 37.8 °C	63.0 µin/in-°F @Temperature 100 °F	ASTM E831
Thermal Conductivity	0.216 W/m-K	1.50 BTU-in/hr-ft²-°F	ASTM C177
Deflection Temperature at 0.46 MPa (66 psi)	88.9 °C	192 °F	annealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	77.8 °C	172 °F	annealed; ASTM D648
Vicat Softening Point	82.8 °C	181 °F	50°C/hr; 50N; ASTM D1525
	93.3 °C	200 °F	50°C/hr; 10N; ASTM D1525

Optical Properties	Metric	English	Comments
Refractive Index	1.49 @Temperature 22.8 °C	1.49 @Temperature 73.0 °F	N_D; ASTM D542
Haze	<= 2.0 % @Thickness 3.17 mm	<= 2.0 % @Thickness 0.125 in	Diffusion; ASTM D1003
Transmission, Visible	90 % @Thickness 3.17 mm	90 % @Thickness 0.125 in	ASTM D1003

图：

上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
欢迎新老客户来电咨询;
联系人：李先生
联系电话；13636696005
联系QQ；1396427082
联系邮箱；1396427082@qq.com