类别：聚合物；热塑性塑料；丙烯酸（有机玻璃）；丙烯酸，冲击改性
材料说明：该聚二-甲基丙烯酸甲脂®影响PMMA系列提供冲击的最佳组合，化学和耐热性以及提供刚性和表面硬度。在聚二-甲基丙烯酸甲脂®系列的等级可以通过注塑或挤出加工。
物性表：| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.16 g/cc | 0.0419 lb/in³ | ISO 1183 |
| Water Absorption | 0.35 % | 0.35 % | ISO 62 |
| Linear Mold Shrinkage | 0.0040 - 0.0070 cm/cm | 0.0040 - 0.0070 in/in | |
| Melt Flow | 1.8 g/10 min | 1.8 g/10 min | ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 54 | 54 | ISO 2039-2 |
| Tensile Strength | 50.0 MPa | 7250 psi | ISO 527 |
| Elongation at Break | 25 % | 25 % | ISO 527 |
| Flexural Strength | 70.0 MPa | 10200 psi | ISO 178 |
| Flexural Modulus | 2.00 GPa | 290 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 6.00 kJ/m² | 2.86 ft-lb/in² | ISO 180/1A |
| Charpy Impact Unnotched | 6.50 J/cm² | 30.9 ft-lb/in² | ISO 179/1eU |
| Charpy Impact, Notched | 0.650 J/cm² | 3.09 ft-lb/in² | ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 110 µm/m-°C | 61.1 µin/in-°F | ASTM E831 |
| Deflection Temperature at 1.8 MPa (264 psi) | 93.0 °C | 199 °F | ISO 75A |
| Vicat Softening Point | 95.0 °C | 203 °F | ISO 306B |
| 110 °C | 230 °F | ISO 306A | |
| Flammability, UL94 | HB | HB | |
| Glow Wire Test | 650 °C | 1200 °F | IEC 695-2-1 |
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.49 | 1.49 | ISO 489 |
| Haze | 2.8 % | 2.8 % | ASTM D1003 |
| Transmission, Visible | 90 % | 90 % | ASTM D1003 |
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
欢迎新老客户来电咨询;
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com