类别：聚合物；热塑性塑料；丙烯酸（有机玻璃）；丙烯酸，冲击改性
材料说明：该聚二-甲基丙烯酸甲脂®影响PMMA系列提供冲击的最佳组合，化学和耐热性以及提供刚性和表面硬度。在聚二-甲基丙烯酸甲脂®系列的等级可以通过注塑或挤出加工。
物性表：
图：物性表：
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 |
| Water Absorption | 0.36 % | 0.36 % | ISO 62 |
| Linear Mold Shrinkage | 0.0040 - 0.0080 cm/cm | 0.0040 - 0.0080 in/in | |
| Melt Flow | 1.3 g/10 min | 1.3 g/10 min | ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 35 | 35 | ISO 2039-2 |
| Tensile Strength | 45.0 MPa | 6530 psi | ISO 527 |
| Elongation at Break | 35 % | 35 % | ISO 527 |
| Flexural Strength | 60.0 MPa | 8700 psi | ISO 178 |
| Flexural Modulus | 1.70 GPa | 247 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 7.50 kJ/m² | 3.57 ft-lb/in² | ISO 180/1A |
| Charpy Impact Unnotched | 7.80 J/cm² | 37.1 ft-lb/in² | ISO 179/1eU |
| Charpy Impact, Notched | 0.800 J/cm² | 3.81 ft-lb/in² | ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 120 µm/m-°C | 66.7 µin/in-°F | ASTM E831 |
| Deflection Temperature at 1.8 MPa (264 psi) | 92.0 °C | 198 °F | ISO 75A |
| Vicat Softening Point | 93.0 °C | 199 °F | ISO 306B |
| 108 °C | 226 °F | ISO 306A | |
| Flammability, UL94 | HB | HB | |
| Glow Wire Test | 650 °C | 1200 °F | IEC 695-2-1 |
| Optical Properties | Metric | English | Comments |
| Refractive Index | 1.49 | 1.49 | ISO 489 |
| Haze | 3.0 % | 3.0 % | ASTM D1003 |
| Transmission, Visible | 90 % | 90 % | ASTM D1003 |
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
欢迎新老客户来电咨询;
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com