| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.44 g/cc | 0.0520 lb/in³ | |||
| Linear Mold Shrinkage | 0.020 - 0.025 cm/cm | 0.020 - 0.025 in/in | ISO 294-4 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | ISO 527 | ||
| Elongation at Break | 6.0 % | 6.0 % | ISO 527 | ||
| Tensile Modulus | 3.40 GPa | 493 ksi | ISO 527 | ||
| Izod Impact, Notched | 0.690 J/cm @Thickness 4.00 mm, Temperature 23.0 °C |
1.29 ft-lb/in @Thickness 0.157 in, Temperature 73.4 °F |
ISO 180 | ||
| Izod Impact, Unnotched | 7.40 J/cm @Thickness 4.00 mm, Temperature 23.0 °C |
13.9 ft-lb/in @Thickness 0.157 in, Temperature 73.4 °F |
ISO 180 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | <= 1000 ohm-cm | <= 1000 ohm-cm | ISO D-257 | ||
| Surface Resistance | <= 1e+05 | <= 1e+05 | ISO D-257 | ||
| Static Decay | <= 2.0 sec | <= 2.0 sec | ISO IEC 61340-5-1 | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 82.0 °C | 180 °F | ISO 75/Method Af | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 185 - 210 °C | 365 - 410 °F | |||
| Mold Temperature | 80.0 - 105 °C | 176 - 221 °F | |||
| Drying Temperature | 80.0 °C @Time 10800 - 14400 sec |
176 °F @Time 3.00 - 4.00 hour |
Pre-drying in a dehumidifier | ||
| Injection Pressure | 60.0 - 80.0 MPa | 8700 - 11600 psi | |||
| De |
|||||
| Injection Speed | Moderate | ||||
图：
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
主要销售：PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com