| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.39 g/cc | 1.39 g/cc | ASTM D 792 |
| Additive Loading | 13.0 % | 13.0 % | Primary Additive |
| Linear Mold Shrinkage | 0.0150 - 0.0200 cm/cm @Thickness 3.20 mm |
0.0150 - 0.0200 in/in @Thickness 0.126 in |
ASTM D 955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 36.2 MPa | 5250 psi | ASTM D 638 |
| Elongation at Break | >= 10.0 % | >= 10.0 % | ASTM D 638 |
| Tensile Modulus | 1.38 GPa | 200 ksi | ASTM D 638 |
| Flexural Strength | 48.3 MPa | 7000 psi | ASTM D 790 |
| Flexural Modulus | 1.52 GPa | 220 ksi | ASTM D 790 |
| Izod Impact, Notched | 0.801 J/cm @Thickness 3.20 mm |
1.50 ft-lb/in @Thickness 0.126 in |
ASTM D 256 |
| Izod Impact, Unnotched | NB @Thickness 3.20 mm |
NB @Thickness 0.126 in |
ASTM D 4812 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+9 - 9.90e+10 ohm-cm | 1.00e+9 - 9.90e+10 ohm-cm | ASTM D 257 |
| Surface Resistivity per Square | 1.00e+10 - 9.90e+11 ohm | 1.00e+10 - 9.90e+11 ohm | ASTM D 257; ESD STM11.11 |
| Static Decay | <= 2.00 sec | <= 2.00 sec | FTMS101C; 4046.1 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 177 - 204 °C | 350 - 400 °F | |
| Mold Temperature | 82.2 - 121 °C | 180 - 250 °F | |
| Drying Temperature | 121 °C @Time 7200 sec |
250 °F @Time 2.00 hour |
|
| Moisture Content | 0.150 % | 0.150 % | |
| Dew Point | -31.7 °C | -25.0 °F | |
| Injection Pressure | 68.9 - 103 MPa | 10000 - 15000 psi | |
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
主要销售：PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com