类别：聚合物；热塑性塑料；树脂聚合物；丙烯腈-丁二烯-苯乙烯/尼龙共混物；尼龙
材料说明：®Terblend N nm-13 ABS／PA共混物是结合优良的低温冲击强度具有易加工性和良好的表面外观。
物性表：| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ISO 1183 | ||
| Moisture Absorption at Equilibrium | 1.1 % | 1.1 % | 23°C/50% RH; ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0070 cm/cm | 0.0070 in/in | ISO 2577 | ||
| Melt Flow | 26.75 g/10 min @Load 10.0 kg, Temperature 240 °C |
26.75 g/10 min @Load 22.0 lb, Temperature 464 °F |
ISO 1133 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 94 | 94 | ISO 2039-2 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | IEC 60093 | ||
| Dielectric Constant | 3.3 @Frequency 1.00e+6 Hz |
3.3 @Frequency 1.00e+6 Hz |
IEC 60250 | ||
| Dissipation Factor | 0.055 @Frequency 1.00e+6 Hz |
0.055 @Frequency 1.00e+6 Hz |
IEC 60250 | ||
| Thermal Properties | Metric | English | Comments | ||
| Vicat Softening Point | 91.0 °C | 196 °F | VST/B/50; ISO 306 | ||
| 165 °C | 329 °F | VST/A/50; ISO 306 | |||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 240 - 270 °C | 464 - 518 °F | Injection Molding | ||
| Mold Temperature | 40.0 - 80.0 °C | 104 - 176 °F | Injection Molding | ||
| De |
|||||
| Color | Natural | ||||
| Commercial Status | Europe | ||||
| Primary Processing Technique | Injection Molding and Extrusion | ||||
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
主要销售：PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。如您需要提前了解原料产品的相关性能或是需要原料产品的相关报告，请您通过电话或是QQ与我联系！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com