颗粒图片:
包装图片:
成品图片:
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.12 g/cc | 0.0405 lb/in³ | |||
1.33 g/cc | 0.0480 lb/in³ | DAM; ISO 1183 | |||
Water Absorption | 4.5 % @Thickness 2.00 mm |
4.5 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 | ||
Moisture Absorption | 1.50 % @Thickness 2.00 mm |
1.50 % @Thickness 0.0787 in |
DAM; Sim. to ISO 62 | ||
Water Absorption at Saturation | 0.85 % | 0.85 % | DAM; Immersion 24h; ASTM D570 | ||
Viscosity | 69805 cP @Shear Rate 5000 1/s, Temperature 305 °C |
69805 cP @Shear Rate 5000 1/s, Temperature 581 °F |
ISO 11403-1 -2 | ||
88510 cP @Shear Rate 5000 1/s, Temperature 295 °C |
88510 cP @Shear Rate 5000 1/s, Temperature 563 °F |
ISO 11403-1 -2 | |||
115100 cP @Shear Rate 5000 1/s, Temperature 285 °C |
115100 cP @Shear Rate 5000 1/s, Temperature 545 °F |
ISO 11403-1 -2 | |||
241800 cP @Shear Rate 500 1/s, Temperature 305 °C |
241800 cP @Shear Rate 500 1/s, Temperature 581 °F |
ISO 11403-1 -2 | |||
308700 cP @Shear Rate 500 1/s, Temperature 295 °C |
308700 cP @Shear Rate 500 1/s, Temperature 563 °F |
ISO 11403-1 -2 | |||
403200 cP @Shear Rate 500 1/s, Temperature 285 °C |
403200 cP @Shear Rate 500 1/s, Temperature 545 °F |
ISO 11403-1 -2 | |||
Viscosity Test | 160 cm³/g | 160 cm³/g | DAM; ISO 307 1157 1628 | ||
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | DAM; ISO 294-4 2577 | ||
Linear Mold Shrinkage, Transverse | 0.0070 cm/cm | 0.0070 in/in | DAM; ISO 294-4 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Rockwell M | 70 | 70 | DAM; ISO 2039-2 | ||
Hardness, Rockwell R | 110 | 110 | DAM; ISO 2039-2 | ||
Tensile Strength at Break | 108 MPa | 15700 psi | 50%RH; ISO 527-1/-2 | ||
146 MPa | 21200 psi | DAM; ISO 527-1/-2 | |||
Tensile Stress | 8.47 MPa @Strain 0.230 %, Temperature 150 °C |
1230 psi @Strain 0.230 %, Temperature 302 °F |
DAM; ISO 11403-1 -2 | ||
10.7 MPa @Strain 0.240 %, Temperature 90.0 °C |
1550 psi @Strain 0.240 %, Temperature 194 °F |
50%RH; ISO 11403-1 -2 | |||
11.24 MPa @Strain 0.240 %, Temperature 90.0 °C |
1630 psi @Strain 0.240 %, Temperature 194 °F |
DAM; ISO 11403-1 -2 | |||
13.42 MPa @Strain 0.420 %, Temperature 150 °C |
1946 psi @Strain 0.420 %, Temperature 302 °F |
50%RH; ISO 11403-1 -2 | |||
19.37 MPa @Strain 0.330 %, Temperature 40.0 °C |
2809 psi @Strain 0.330 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
26.06 MPa @Strain 0.820 %, Temperature 150 °C |
3780 psi @Strain 0.820 %, Temperature 302 °F |
DAM; ISO 11403-1 -2 | |||
30.98 MPa @Strain 1.24 %, Temperature 150 °C |
4493 psi @Strain 1.24 %, Temperature 302 °F |
50%RH; ISO 11403-1 -2 | |||
31.49 MPa @Strain 0.830 %, Temperature 90.0 °C |
4567 psi @Strain 0.830 %, Temperature 194 °F |
50%RH; ISO 11403-1 -2 | |||
34.96 MPa @Strain 0.310 %, Temperature -40.0 °C |
5071 psi @Strain 0.310 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
36.33 MPa @Strain 0.890 %, Temperature 90.0 °C |
5269 psi @Strain 0.890 %, Temperature 194 °F |
DAM; ISO 11403-1 -2 | |||
41.33 MPa @Strain 0.590 %, Temperature 23.0 °C |
5994 psi @Strain 0.590 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
44.4 MPa @Strain 2.51 %, Temperature 150 °C |
6440 psi @Strain 2.51 %, Temperature 302 °F |
50%RH; ISO 11403-1 -2 | |||
44.82 MPa @Strain 0.510 %, Temperature 40.0 °C |
6501 psi @Strain 0.510 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
45.52 MPa @Strain 1.99 %, Temperature 150 °C |
6602 psi @Strain 1.99 %, Temperature 302 °F |
DAM; ISO 11403-1 -2 | |||
51.14 MPa @Strain 1.03 %, Temperature 40.0 °C |
7417 psi @Strain 1.03 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
53.18 MPa @Strain 4.05 %, Temperature 150 °C |
7713 psi @Strain 4.05 %, Temperature 302 °F |
50%RH; ISO 11403-1 -2 | |||
53.24 MPa @Strain 1.88 %, Temperature 90.0 °C |
7722 psi @Strain 1.88 %, Temperature 194 °F |
50%RH; ISO 11403-1 -2 | |||
58.28 MPa @Strain 3.57 %, Temperature 150 °C |
8453 psi @Strain 3.57 %, Temperature 302 °F |
DAM; ISO 11403-1 -2 | |||
59.6 MPa @Strain 0.710 %, Temperature 0.000 °C |
8640 psi @Strain 0.710 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
62.58 MPa @Strain 1.99 %, Temperature 90.0 °C |
9076 psi @Strain 1.99 %, Temperature 194 °F |
DAM; ISO 11403-1 -2 | |||
67.95 MPa @Strain 3.35 %, Temperature 90.0 °C |
9855 psi @Strain 3.35 %, Temperature 194 °F |
50%RH; ISO 11403-1 -2 | |||
69.02 MPa @Strain 0.760 %, Temperature 23.0 °C |
10010 psi @Strain 0.760 %, Temperature 73.4 °F |
DAM; ISO 11403-1 -2 | |||
69.98 MPa @Strain 0.740 %, Temperature -20.0 °C |
10150 psi @Strain 0.740 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
76.42 MPa @Strain 1.31 %, Temperature 23.0 °C |
11080 psi @Strain 1.31 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
79.23 MPa @Strain 2.10 %, Temperature 40.0 °C |
11490 psi @Strain 2.10 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
81.91 MPa @Strain 3.42 %, Temperature 90.0 °C |
11880 psi @Strain 3.42 %, Temperature 194 °F |
DAM; ISO 11403-1 -2 | |||
88.29 MPa @Strain 0.870 %, Temperature -40.0 °C |
12810 psi @Strain 0.870 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
90.52 MPa @Strain 1.19 %, Temperature 40.0 °C |
13130 psi @Strain 1.19 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
90.65 MPa @Strain 0.980 %, Temperature 0.000 °C |
13150 psi @Strain 0.980 %, Temperature 32.0 °F |
DAM; ISO 11403-1 -2 | |||
96.81 MPa @Strain 3.55 %, Temperature 40.0 °C |
14040 psi @Strain 3.55 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
100.09 MPa @Strain 1.07 %, Temperature -40.0 °C |
14517 psi @Strain 1.07 %, Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
100.58 MPa @Strain 1.35 %, Temperature 0.000 °C |
14588 psi @Strain 1.35 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
104.57 MPa @Strain 2.27 %, Temperature 23.0 °C |
15167 psi @Strain 2.27 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
105.95 MPa @Strain 1.16 %, Temperature -20.0 °C |
15367 psi @Strain 1.16 %, Temperature -4.00 °F |
DAM; ISO 11403-1 -2 | |||
114.59 MPa @Strain 1.47 %, Temperature 23.0 °C |
16620 psi @Strain 1.47 %, Temperature 73.4 °F |
DAM; ISO 11403-1 -2 | |||
115.64 MPa @Strain 1.36 %, Temperature -20.0 °C |
16772 psi @Strain 1.36 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
121.49 MPa @Strain 3.63 %, Temperature 23.0 °C |
17621 psi @Strain 3.63 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
127.79 MPa @Strain 2.22 %, Temperature 40.0 °C |
18534 psi @Strain 2.22 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
134.54 MPa @Strain 2.17 %, Temperature 0.000 °C |
19513 psi @Strain 2.17 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
140.54 MPa @Strain 1.57 %, Temperature -40.0 °C |
20384 psi @Strain 1.57 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
142.15 MPa @Strain 1.79 %, Temperature 0.000 °C |
20617 psi @Strain 1.79 %, Temperature 32.0 °F |
DAM; ISO 11403-1 -2 | |||
143.3 MPa @Strain 4.06 %, Temperature 40.0 °C |
20780 psi @Strain 4.06 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
151.92 MPa @Strain 2.49 %, Temperature 23.0 °C |
22034 psi @Strain 2.49 %, Temperature 73.4 °F |
DAM; ISO 11403-1 -2 | |||
153.48 MPa @Strain 1.89 %, Temperature -20.0 °C |
22260 psi @Strain 1.89 %, Temperature -4.00 °F |
DAM; ISO 11403-1 -2 | |||
154.85 MPa @Strain 2.14 %, Temperature -20.0 °C |
22459 psi @Strain 2.14 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
157.32 MPa @Strain 3.39 %, Temperature 0.000 °C |
22817 psi @Strain 3.39 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
158.08 MPa @Strain 1.86 %, Temperature -40.0 °C |
22928 psi @Strain 1.86 %, Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
181.01 MPa @Strain 3.02 %, Temperature 0.000 °C |
26253 psi @Strain 3.02 %, Temperature 32.0 °F |
DAM; ISO 11403-1 -2 | |||
185.08 MPa @Strain 3.21 %, Temperature -20.0 °C |
26844 psi @Strain 3.21 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
186.91 MPa @Strain 2.46 %, Temperature -40.0 °C |
27109 psi @Strain 2.46 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
193.42 MPa @Strain 2.84 %, Temperature -20.0 °C |
28053 psi @Strain 2.84 %, Temperature -4.00 °F |
DAM; ISO 11403-1 -2 | |||
209.81 MPa @Strain 2.88 %, Temperature -40.0 °C |
30430 psi @Strain 2.88 %, Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
Elongation at Break | 3.7 % | 3.7 % | DAM; ISO 527-1/-2 | ||
7.0 % | 7.0 % | 50%RH; ISO 527-1/-2 | |||
Tensile Modulus | 6.20 GPa | 899 ksi | 50%RH; ISO 527-1/-2 | ||
8.90 GPa | 1290 ksi | DAM; ISO 527-1/-2 | |||
1.83 GPa @Temperature 225 °C |
265 ksi @Temperature 437 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
3.18 GPa @Temperature 145 °C |
461 ksi @Temperature 293 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
3.578 GPa @Temperature 120 °C |
518.9 ksi @Temperature 248 °F |
50%RH; ISO 11403-1 -2 | |||
4.215 GPa @Temperature 120 °C |
611.3 ksi @Temperature 248 °F |
DAM; ISO 11403-1 -2 | |||
4.57 GPa @Temperature 85.0 °C |
662 ksi @Temperature 185 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
5.636 GPa @Temperature 40.0 °C |
817.4 ksi @Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
7.4963 GPa @Temperature 55.0 °C |
1087.2 ksi @Temperature 131 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
8.468 GPa @Temperature 15.0 °C |
1228 ksi @Temperature 59.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
8.484 GPa @Temperature -10.0 °C |
1231 ksi @Temperature 14.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
8.70 GPa @Temperature 40.0 °C |
1260 ksi @Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
8.75 GPa @Temperature -35.0 °C |
1270 ksi @Temperature -31.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
9.26 GPa @Temperature -50.0 °C |
1340 ksi @Temperature -58.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
10.534 GPa @Temperature -40.0 °C |
1527.8 ksi @Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
10.72 GPa @Temperature -40.0 °C |
1555 ksi @Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
Flexural Modulus | 6.20 GPa | 899 ksi | 50%RH; ISO 178 | ||
7.50 GPa | 1090 ksi | DAM; ISO 178 | |||
Shear Modulus | 0.475 GPa @Temperature 160 °C |
68.9 ksi @Temperature 320 °F |
DAM; Dynamic; ISO 11403-1 -2 | ||
0.555 GPa @Temperature 120 °C |
80.5 ksi @Temperature 248 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
0.922 GPa @Temperature 70.0 °C |
134 ksi @Temperature 158 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
1.46 GPa @Temperature 20.0 °C |
212 ksi @Temperature 68.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
1.55 GPa @Temperature -20.0 °C |
225 ksi @Temperature -4.00 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
1.85 GPa @Temperature -50.0 °C |
268 ksi @Temperature -58.0 °F |
DAM; Dynamic; ISO 11403-1 -2 | |||
Secant Modulus | 2.14 GPa @Strain 4.78 %, Temperature 40.0 °C |
311 ksi @Strain 4.78 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | ||
2.52 GPa @Strain 4.91 %, Temperature 23.0 °C |
366 ksi @Strain 4.91 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
3.41 GPa @Strain 2.53 %, Temperature 40.0 °C |
495 ksi @Strain 2.53 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
4.20 GPa @Strain 2.66 %, Temperature 23.0 °C |
609 ksi @Strain 2.66 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
4.97 GPa @Strain 1.03 %, Temperature 40.0 °C |
720 ksi @Strain 1.03 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
5.0777 GPa @Strain 2.69 %, Temperature 40.0 °C |
736.47 ksi @Strain 2.69 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
5.13 GPa @Strain 3.64 %, Temperature 0.000 °C |
744 ksi @Strain 3.64 %, Temperature 32.0 °F |
DAM; ISO 11403-1 -2 | |||
5.41 GPa @Strain 2.97 %, Temperature 23.0 °C |
785 ksi @Strain 2.97 %, Temperature 73.4 °F |
DAM; ISO 11403-1 -2 | |||
5.71 GPa @Strain 2.52 %, Temperature 0.000 °C |
828 ksi @Strain 2.52 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
5.83 GPa @Strain 1.31 %, Temperature 23.0 °C |
846 ksi @Strain 1.31 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
5.8697 GPa @Strain 0.330 %, Temperature 40.0 °C |
851.34 ksi @Strain 0.330 %, Temperature 104 °F |
50%RH; ISO 11403-1 -2 | |||
6.30 GPa @Strain 3.24 %, Temperature -20.0 °C |
914 ksi @Strain 3.24 %, Temperature -4.00 °F |
DAM; ISO 11403-1 -2 | |||
6.55 GPa @Strain 3.24 %, Temperature -40.0 °C |
950 ksi @Strain 3.24 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
6.73 GPa @Strain 3.34 %, Temperature -40.0 °C |
976 ksi @Strain 3.34 %, Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
6.79 GPa @Strain 2.45 %, Temperature -20.0 °C |
985 ksi @Strain 2.45 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
7.01 GPa @Strain 0.590 %, Temperature 23.0 °C |
1020 ksi @Strain 0.590 %, Temperature 73.4 °F |
50%RH; ISO 11403-1 -2 | |||
7.45 GPa @Strain 1.35 %, Temperature 0.000 °C |
1080 ksi @Strain 1.35 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
7.61 GPa @Strain 1.19 %, Temperature 40.0 °C |
1100 ksi @Strain 1.19 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
7.80 GPa @Strain 1.47 %, Temperature 23.0 °C |
1130 ksi @Strain 1.47 %, Temperature 73.4 °F |
DAM; ISO 11403-1 -2 | |||
7.94 GPa @Strain 1.79 %, Temperature 0.000 °C |
1150 ksi @Strain 1.79 %, Temperature 32.0 °F |
DAM; ISO 11403-1 -2 | |||
8.12 GPa @Strain 1.89 %, Temperature -20.0 °C |
1180 ksi @Strain 1.89 %, Temperature -4.00 °F |
DAM; ISO 11403-1 -2 | |||
8.39 GPa @Strain 0.710 %, Temperature 0.000 °C |
1220 ksi @Strain 0.710 %, Temperature 32.0 °F |
50%RH; ISO 11403-1 -2 | |||
8.45 GPa @Strain 1.84 %, Temperature -40.0 °C |
1230 ksi @Strain 1.84 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
8.50 GPa @Strain 1.86 %, Temperature -40.0 °C |
1230 ksi @Strain 1.86 %, Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
8.50 GPa @Strain 1.36 %, Temperature -20.0 °C |
1230 ksi @Strain 1.36 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
8.79 GPa @Strain 0.510 %, Temperature 40.0 °C |
1270 ksi @Strain 0.510 %, Temperature 104 °F |
DAM; ISO 11403-1 -2 | |||
9.08 GPa @Strain 0.760 %, Temperature 23.0 °C |
1320 ksi @Strain 0.760 %, Temperature 73.4 °F |
DAM; ISO 11403-1 -2 | |||
9.13 GPa @Strain 1.16 %, Temperature -20.0 °C |
1320 ksi @Strain 1.16 %, Temperature -4.00 °F |
DAM; ISO 11403-1 -2 | |||
9.25 GPa @Strain 0.980 %, Temperature 0.000 °C |
1340 ksi @Strain 0.980 %, Temperature 32.0 °F |
DAM; ISO 11403-1 -2 | |||
9.35 GPa @Strain 1.07 %, Temperature -40.0 °C |
1360 ksi @Strain 1.07 %, Temperature -40.0 °F |
DAM; ISO 11403-1 -2 | |||
9.46 GPa @Strain 0.740 %, Temperature -20.0 °C |
1370 ksi @Strain 0.740 %, Temperature -4.00 °F |
50%RH; ISO 11403-1 -2 | |||
10.1 GPa @Strain 0.870 %, Temperature -40.0 °C |
1470 ksi @Strain 0.870 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
11.3 GPa @Strain 0.310 %, Temperature -40.0 °C |
1640 ksi @Strain 0.310 %, Temperature -40.0 °F |
50%RH; ISO 11403-1 -2 | |||
Izod Impact, Notched (ISO) | 21.0 kJ/m² | 9.99 ft-lb/in² | DAM; ISO 180/1A | ||
26.0 kJ/m² | 12.4 ft-lb/in² | 50%RH; ISO 180/1A | |||
15.0 kJ/m² @Temperature -40.0 °C |
7.14 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 180/1A | |||
15.0 kJ/m² @Temperature -40.0 °C |
7.14 ft-lb/in² @Temperature -40.0 °F |
50%RH; ISO 180/1A | |||
16.0 kJ/m² @Temperature -30.0 °C |
7.61 ft-lb/in² @Temperature -22.0 °F |
50%RH; ISO 180/1A | |||
17.0 kJ/m² @Temperature -30.0 °C |
8.09 ft-lb/in² @Temperature -22.0 °F |
DAM; ISO 180/1A | |||
Izod Impact, Unnotched (ISO) | 80.0 kJ/m² | 38.1 ft-lb/in² | DAM; ISO 180/1U | ||
80.0 kJ/m² | 38.1 ft-lb/in² | 50%RH; ISO 180/1U | |||
75.0 kJ/m² @Temperature -30.0 °C |
35.7 ft-lb/in² @Temperature -22.0 °F |
50%RH; ISO 180/1U | |||
80.0 kJ/m² @Temperature -30.0 °C |
38.1 ft-lb/in² @Temperature -22.0 °F |
DAM; ISO 180/1U | |||
Charpy Impact Unnotched | 9.70 J/cm² | 46.2 ft-lb/in² | DAM; ISO 179/1eU | ||
9.80 J/cm² | 46.6 ft-lb/in² | 50%RH; ISO 179/1eU | |||
10.0 J/cm² @Temperature -30.0 °C |
47.6 ft-lb/in² @Temperature -22.0 °F |
50%RH; ISO 179/1eU | |||
10.6 J/cm² @Temperature -30.0 °C |
50.4 ft-lb/in² @Temperature -22.0 °F |
DAM; ISO 179/1eU | |||
Charpy Impact, Notched | 2.00 J/cm² | 9.52 ft-lb/in² | DAM; ISO 179/1eA | ||
2.80 J/cm² | 13.3 ft-lb/in² | 50%RH; ISO 179/1eA | |||
1.40 J/cm² @Temperature -40.0 °C |
6.66 ft-lb/in² @Temperature -40.0 °F |
DAM; ISO 179/1eA | |||
1.70 J/cm² @Temperature -30.0 °C |
8.09 ft-lb/in² @Temperature -22.0 °F |
50%RH; ISO 179/1eA | |||
1.80 J/cm² @Temperature -40.0 °C |
8.57 ft-lb/in² @Temperature -40.0 °F |
50%RH; ISO 179/1eA | |||
1.80 J/cm² @Temperature -30.0 °C |
8.57 ft-lb/in² @Temperature -22.0 °F |
DAM; ISO 179/1eA | |||
Tensile Creep Modulus, 1 hour | 5300 MPa @Time 3600 sec |
769000 psi @Time 1.00 hour |
50%RH; ISO 899-1 | ||
Tensile Creep Modulus, 1000 hours | 4300 MPa @Time 3.60e+6 sec |
624000 psi @Time 1000 hour |
50%RH; ISO 899-1 | ||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | 50%RH; IEC 60093 | ||
>= 1.00e+15 ohm-cm | >= 1.00e+15 ohm-cm | DAM; IEC 60093 | |||
Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | 50%RH; IEC 60093 | ||
Comparative Tracking Index | 400 V | 400 V | DAM; IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 15.0 µm/m-°C | 8.33 µin/in-°F | DAM; ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 119 µm/m-°C | 66.1 µin/in-°F | DAM; ISO 11359-1/-2 | ||
95.0 µm/m-°C @Temperature -40.0 °C |
52.8 µin/in-°F @Temperature -40.0 °F |
ISO 11403-1 -2 | |||
95.0 µm/m-°C @Temperature 23.0 °C |
52.8 µin/in-°F @Temperature 73.4 °F |
ISO 11403-1 -2 | |||
Specific Heat Capacity | 2.20 J/g-°C | 0.526 BTU/lb-°F | |||
Thermal Conductivity | 0.220 W/m-K | 1.53 BTU-in/hr-ft²-°F | of melt | ||
Melting Point | 262 °C | 504 °F | DAM; 10°C/min; ISO 11357-1/-3 | ||
Deflection Temperature at 0.46 MPa (66 psi) | 261 °C | 502 °F | DAM; ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 246 °C | 475 °F | DAM; ISO 75-1/-2 | ||
Vicat Softening Point | 245 °C | 473 °F | DAM; 50°C/h 50N; ISO 306 | ||
Glass Transition Temp, Tg | 75.0 °C | 167 °F | DAM; 10°C/min; ISO 11357-1/-2 | ||
Flammability, UL94 | HB @Thickness 1.50 mm |
HB @Thickness 0.0591 in |
DAM; IEC 60695-11-10 | ||
HB @Thickness 0.800 mm |
HB @Thickness 0.0315 in |
DAM; IEC 60695-11-10 | |||
De |
|||||
Additives | Lubricants | ||||
Release agent | |||||
Delivery form | Pellets | ||||
Eff. thermal diffusivity | 1.03E-07 m²/s | ||||
Part Marking Code | >PA66-IGF33< | ISO 11469 | |||
Processing | Injection Moulding | ||||
Regional Availability | Asia Pacific | ||||
Europe | |||||
Global | |||||
Near East/Africa | |||||
North America | |||||
South and Central America | |||||
Resin Identification | PA66-IGF33 | ||||
Special characteristics | Heat stabilised or stable to heat | ||||
UL recognition | UL | DAM |
概述
PA塑料(尼龙,聚酰胺),英文名称:Polyamide
PA的品种繁多,有PA6、PA66、PAll、PAl2、PA46、PA610、PA612、PAl010等,以及近几年开发的半芳香族尼龙PA6T和特种尼龙等很多新品种。
物理性能
比重:PA6 1.14克/立方厘米,PA66 1.15克/立方厘米,PA1010 1.05克/立方厘米
成型收缩率:PA6 0.8-2.5% ,PA66 1.5-2.2%
成型温度:220-300℃
干燥条件:100-110℃/12小时
坚韧、耐磨、耐油、,耐水、抗酶菌、但吸水大
燃烧鉴别方法:火焰上端黄色,下端蓝色,燃烧后塑料熔滴落,起泡,离火后特殊的羊毛,指甲烧焦味和带芹菜味
尼龙6: |
弹性好,冲击强度,吸水较大 |
尼龙66: |
性能优于尼龙6,强度高,耐磨性好 |
尼龙610: |
与尼龙66相似,但吸水小,刚度低 |
尼龙1010: |
半透明,吸水小。耐寒性较好。适于制作一般机械零件、减磨耐磨零件、传动零件以及化工、电器、仪表等零件 |
成型性能
1、结晶料,熔点较高,熔融温度范围窄,热稳定性差,料温超过300度、滞留时间超过30分钟即分解。较易吸湿,需干燥,含水量不得超过0.3%。
2、流动性好,易溢料。宜用自锁时喷嘴,并应加热。
3、成型收缩范围及收缩率大,方向性明显,易发生缩孔、变形等。
4、模温按塑件壁厚在20~90度范围内选取,注射压力按注射机类型、料温、塑件形状尺寸、模具浇注系统选定,成型周期按塑件壁厚选定。树脂粘度小时,注射、冷却时间应取长,并用白油作脱模剂。
5、模具浇注系统的形式和尺寸,增大流道和浇口尺寸可减少缩水。
聚酰胺的不足之处在于:由于热膨胀和吸水性所至的尺寸精度不够,耐酸性差,硬度和弹性模量不够。经改良以后,也是比较优秀的工程塑料之一。
应用
汽车制造方面
用于制造燃料滤网、燃料过滤器、罐、捕集器、储油槽、发动机汽缸盖罩、散热器水缸、平衡旋转轴齿轮。也可用在汽车的电器配件、接线柱等。另外,它还可用作驱动、控制部件等。
电器电子工业
可用于制造电饭锅、电动吸尘器、高频电子食品加热器,电器产品的接线柱、开关和电阻器等。
医疗器械仪器
用于医用输血管、取血器、输液器等。PA单丝可做外科手术缝线、假发等;另外,电子打字机的数字旋转盘、接线柱、传动齿轮、印刷机的带式过滤片等。
其它方面
用于制作一次性打火机体、碱性干电池衬垫,摩托车驾驶员的头盔,办公机器外壳,办公用椅的角轮、座和靠背,冰鞋、钓鱼线等,PA薄膜气体阻隔性能优良,而且耐油性、耐低温冲击性、耐穿透性好,可用于肉、火腿肠等冷冻食品的包装。聚酰胺还可棒材和板材,也作齿轮或其它传动装置。
上海浩铭塑胶有限公司!本公司承诺,所有产品都是原厂家,原包装一线独家营销!
可提供以下报告:COA(产地证明)SGS(检测报告)MSDS(成分报告)FDA(食品安全报告)UL黄卡(出口报告)正规发票!欢迎新老客户来电咨询:
联系人:邓小姐
联系电话:13917657923
联系QQ:996152797
联系邮箱:996152797@qq.com