| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.57 g/cc | 0.0567 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage, Flow | 0.0015 - 0.0030 cm/cm | 0.0015 - 0.0030 in/in | ISO 294-4 |
| Linear Mold Shrinkage, Transverse | 0.0030 - 0.0070 cm/cm | 0.0030 - 0.0070 in/in | ISO 294-4 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 105 MPa | 15200 psi | 5mm/min; ISO 527-2/1A |
| 107 MPa @Temperature 22.8 °C |
15500 psi @Temperature 73.0 °F |
ASTM D638 | |
| Elongation at Break | 2.4 % | 2.4 % | 5mm/min; ISO 527-2/1A |
| 3.0 % @Temperature 22.8 °C |
3.0 % @Temperature 73.0 °F |
ASTM D638 | |
| Tensile Modulus | 9.10 GPa | 1320 ksi | 1mm/min; ISO 527-2/1A |
| Flexural Strength | 165 MPa | 23900 psi | ISO 178 |
| 172 MPa @Temperature 22.8 °C |
25000 psi @Temperature 73.0 °F |
ASTM D790 | |
| Flexural Modulus | 9.20 GPa | 1330 ksi | ISO 178 |
| 8.62 GPa @Temperature 22.8 °C |
1250 ksi @Temperature 73.0 °F |
ASTM D790 | |
| Izod Impact, Notched | 0.854 J/cm @Temperature 22.8 °C |
1.60 ft-lb/in @Temperature 73.0 °F |
ASTM D256 |
| Izod Impact, Notched (ISO) | 8.00 kJ/m² | 3.81 ft-lb/in² | ISO 180/1A |
| Charpy Impact, Notched | 0.790 J/cm² | 3.76 ft-lb/in² | ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 225 °C | 437 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 205 °C | 401 °F | ASTM D648 |
| Flammability, UL94 | HB | HB | |
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com