Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.65 g/cc | 0.0596 lb/in³ | ISO 1183 |
Moisture Absorption | 0.0500 % | 0.0500 % | 23°C / 50% RH; ISO 62 |
Water Absorption at Saturation | 0.25 % | 0.25 % | ISO 62 |
Melt Index of Compound | 7.0 g/10 min @Load 1.20 kg, Temperature 265 °C |
7.0 g/10 min @Load 2.65 lb, Temperature 509 °F |
MVR [cm^3/10 min]; ISO 1133 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 160 MPa | 23200 psi | 5 mm/min; ISO 527 |
Tensile Strength, Yield | 160 MPa | 23200 psi | 5 mm/min; ISO 527 |
Elongation at Break | 1.5 % | 1.5 % | 5 mm/min; ISO 527 |
Elongation at Yield | 1.5 % | 1.5 % | 5 mm/min; ISO 527 |
Tensile Modulus | 15.0 GPa | 2180 ksi | 1 mm/min; ISO 527 |
Flexural Yield Strength | 225 MPa | 32600 psi | 2 mm/min; ISO 178 |
Flexural Modulus | 13.0 GPa | 1890 ksi | 2 mm/min; ISO 178 |
Izod Impact, Notched (ISO) | 10.0 kJ/m² | 4.76 ft-lb/in² | 80*10*4; ISO 180/1A |
8.00 kJ/m² @Temperature -30.0 °C |
3.81 ft-lb/in² @Temperature -22.0 °F |
80*10*4; ISO 180/1A | |
Charpy Impact, Notched | 0.700 J/cm² | 3.33 ft-lb/in² | Edgew 80*10*4 sp=62mm; ISO 179/1eA |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 20.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
11.1 µin/in-°F @Temperature 73.4 - 176 °F |
ISO 11359-2 |
CTE, linear, Transverse to Flow | 80.0 µm/m-°C @Temperature 23.0 - 80.0 °C |
44.4 µin/in-°F @Temperature 73.4 - 176 °F |
ISO 11359-2 |
Deflection Temperature at 1.8 MPa (264 psi) | 235 °C | 455 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |
Vicat Softening Point | 235 °C | 455 °F | Rate B/50; ISO 306 |
240 °C | 464 °F | Rate B/120; ISO 306 |
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!
我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
欢迎新老客户来电或QQ咨询:
联系人:李生
联系电话;13636696005
联系QQ;1020580970
联系邮箱;1020580970@qq.com