填料/增强材料: 玻璃纤维增强材料, 20% 填料按重量
特性: 耐热性，高
用途: 汽车领域的应用
加工方法: 注射成型
多点数据: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 料筒后部温度 °C
- 弯曲强度 170 MPa ASTM D790
- 悬壁梁缺口冲击强度 100 J/m ASTM D256
- 伸长率 2.4 % ASTM D638
- 维卡软化温度 175 °C ASTM D1525
- 无缺口悬臂梁冲击 510 J/m ASTM D4812
- 悬壁梁缺口冲击强度 100 J/m ASTM D256
- 建议的最大水分含量 0.020 %
- 建议注射量 %
- 拉伸模量 6260 MPa ASTM D638