Grilamid LC-3H black|PA12-CF30|EMS-GRIVORY物性表报告及物性特性介绍,Grilamid LC-3H black|PA12-CF30|EMS-GRIVORY注塑参数详情-塑料物性表查询网

Product TextsProduct designation according to ISO 1874:1 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.3 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	15000 / 13000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	150 / 140	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3.5 / 4	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	- / 60	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	- / 60	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	- / 13	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	- / 8	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	178 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	165 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	125 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	10 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	130 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
体积电阻率(Volume resistivity)	- / 100	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 50	Ohm	IEC 60093

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.1 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.6 / *	%	Sim. to ISO 62
密度(Density)	1150 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1020	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.32	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2500	J/(kg K)	-
Eff. thermal diffusivity	1.25E-7	m²/s	-
喷射温度(Ejection temperature)	155	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	75	MPa	ISO 294

DiagramsV. stabilized or stable to weatherRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING water content : Chemical Media Resistance

Acids

ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)