Grilamid LV-3 ESD|PA12-GF30|EMS-GRIVORY物性表报告及物性特性介绍,Grilamid LV-3 ESD|PA12-GF30|EMS-GRIVORY注塑参数详情-塑料物性表查询网

Product TextsProduct designation according to ISO 1874:1 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	0.8 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	7800 / 7000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	125 / 110	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	5 / 7	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	85 / 80	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	70 / 65	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	15 / 15	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	10 / 10	kJ/m²	ISO 179/1eA
Shore D hardness (15s)	83 / *	-	ISO 868

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	178 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	160 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (8.00 MPa)	90 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	50 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	120 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.8 / *	mm	IEC 60695-11-10

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
体积电阻率(Volume resistivity)	10000 / 10000	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1000000	Ohm	IEC 60093

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.1 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.6 / *	%	Sim. to ISO 62
密度(Density)	1280 / -	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1080	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.26	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2200	J/(kg K)	-
Eff. thermal diffusivity	1.10E-7	m²/s	-
喷射温度(Ejection temperature)	155	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	280	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	300	mm/s	ISO 294
Injection Molding, pressure at hold	75	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsAnti-static, U.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base .
[/td][/tr][/table]