VESTAMID® L-GB30 nc (nf)|PA12-GB30|Evonik Industries物性表报告及物性特性介绍,VESTAMID® L-GB30 nc (nf)|PA12-GB30|Evonik Industries注塑参数详情-塑料物性表查询网

Product TextsVESTAMID® L-GB30 nc of deflection under load (1.80 MPa)	55 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	150 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	155 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	130 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	130 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	3.2 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.1 / 5	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3.5 / 4	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	310 / 600	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	230 / 370	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 2E12	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E15	Ohm	IEC 60093
电气强度(Electric strength)	31 / 36	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600 / 600	-	IEC 60112

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.1 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.5 / *	%	Sim. to ISO 62
密度(Density)	1250 / 1260	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1090	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.28	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2400	J/(kg K)	-
喷射温度(Ejection temperature)	180	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer duringISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]