Cycoloy C2100|(PC+ABS)|SABIC_IP物性表报告及物性特性介绍,Cycoloy C2100|(PC+ABS)|SABIC

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	16	cm³/10min	ISO 1133
温度(Temperature)	260	°C	ISO 1133
负载(Load)	5	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	2600	MPa	ISO 527-1/-2
屈服应力(Yield stress)	60	MPa	ISO 527-1/-2
屈服应变(Yield strain)	4	%	ISO 527-1/-2
破坏时应变(Stress at break)	50	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	>50	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	50	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	20	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	2500	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	50	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	20	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
洛氏硬度(Rockwell hardness)	R 123	-	ISO 2039-2
球压痕硬度(Ball indentation hardness)	104	MPa	ISO 2039-1

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	112	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	128	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	136	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	75	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	75	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
Burning behav. 5V at thickness h	5VB	class	IEC 60695-11-20
厚度测试(Thickness tested)	2.0	mm	IEC 60695-11-20
Oxygen index	32	%	ISO 4589-1/-2

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
相对介电常数(Relative permittivity) (1MHz)	2.6	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	80	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	225	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.6	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1200	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体热导率(Thermal conductivity of melt)	0.2	W/(m K)	-

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsFlame retardantRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.