Bayblend® FR3021|(PC+ABS)-MD15 FR(40)|Bayer MatSc物性表报告及物性特性介绍,Bayblend® FR3021|(PC+ABS)-MD15 FR(40)|Bayer MatSc注塑参数详情-塑料物性表查询网

Product Texts(PC+ABS) blend 5 mm) 0 mm). of deflection under load (1.80 MPa)	85	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	92	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	96	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	46	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	63	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-0	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 识别(recognition)	UL	-	-

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	3.1	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	3	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	50	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	70	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
电气强度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	275	-	IEC 60112

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1280	kg/m³	ISO 1183

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1050	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.205	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	1860	J/(kg K)	-
Eff. thermal diffusivity	1.05E-7	m²/s	-
喷射温度(Ejection temperature)	100	°C	-

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	240	mm/s	ISO 294

Diagrams Water content: 0.02 % M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
[/td][/tr][/table]