Faradex NS0031|(PC+ABS)-MF(Fe)|SABIC_IP物性表报告及物性特性介绍,Faradex NS0031|(PC+ABS)-MF(Fe)|SABIC

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
熔体流动指数(Melt Flow Index)	12.3	g/10min	ASTM D 1238
温度(Temperature)	280	°C	-
负载(Load)	5	kg	-
模具收缩(Mold Shrinkage) (MD)	0.0059	mm/mm	ASTM D 955
密度(Density) (73°F)	1330	kg/m³	ASTM D 792

流变性能(Rheological properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
熔体体积流动速率(Melt volume-flow rate) (MVR)	31	cm³/10min	ISO 1133
温度(Temperature)	265	°C	ISO 1133
负载(Load)	10	kg	ISO 1133

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
拉伸模量(Tensile Modulus)	3000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	55	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	4.4	%	ISO 527-1/-2
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	4	kJ/m²	ISO 179/1eA
弯曲弹性模量(Flexural modulus) (23°C)	3090	MPa	ISO 178
悬臂梁式冲击切口 (23°C)	5	kJ/m²	ISO 180/1A
悬臂梁式冲击切口	5	kJ/m²	ISO 180/1A
温度(Temperature)	-30	°C	ISO 180/1A
悬臂梁式冲击无切口(Izod Impact unnotched) (23°C)	39	kJ/m²	ISO 180/1U
ASTM数据(ASTM Data)
拉伸模量(Tensile Modulus)	3120	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Yield	61	MPa	ASTM D 638
抗拉强度(Tensile Strength) at Break	57	MPa	ASTM D 638
屈服伸长率(Elongation at Yield)	3.4	%	ASTM D 638
断裂伸长率(Elongation at Break)	3.7	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	2970	MPa	ASTM D 790
悬臂梁式冲击切口 (1/8 in)	0.0528	kJ/m	ASTM D 256
悬臂梁式冲击切口 (Low-温度(Temperature))	0.0413	kJ/m	ASTM D 256
温度(Temperature)	-30	°C	ASTM D 256

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	98	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	109	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	55	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	64	E-6/K	ISO 11359-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	V-0	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
热膨胀系数(Coefficient of Thermal Expansion) (MD)	57	E-6/K	ASTM D 696
热膨胀系数(Coefficient of Thermal Expansion) (TD)	66	E-6/K	ASTM D 696
DTUL @ 264 psi	96	°C	ASTM D 648
Vicat 温度(Temperature)	109	°C	ASTM D 1525

电气性能(Electrical properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
表面电阻率(Surface Resistivity)	100000	Ohm	ASTM D 257
体积电阻率(Volume Resistivity)	1E7	Ohm*cm	ASTM D 257

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据
吸水率(Water absorption)	0.2	%	Sim. to ISO 62
吸湿性(Humidity absorption)	0.1	%	Sim. to ISO 62
密度(Density)	1330	kg/m³	ISO 1183

CharacteristicsProcessingInjection MoldingAdditivesFlame retarding agentFeaturesEMI Attenuation/ShieldingRegional AvailabilityAsia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.