HOSTAFORM LGC90-QX|POM-GF26|Ticona物性表报告及物性特性介绍,HOSTAFORM LGC90-QX|POM-GF26|Ticona注塑参数详情-塑料物性表查询网

Product TextsPreliminary Data Sheetticona.com/tech/processing under Celstran LFRT and Compel

机械性能(机械性能(Mechanical properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9500	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	160	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	2.6	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	60	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	26	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	167	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	166	°C	ISO 75-1/-2

其他属性(Other properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density)	1600	kg/m³	ISO 1183

CharacteristicsProcessingInjection Molding, Profile Extrusion, Sheet ExtrusionDelivery formPelletsRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING6 inches).It should have Screw flight depth should be at least 4.5mm (0.18 Use interior Additional corrosion 16 inches (4 mm) and preferably larger 125 inches (6 mm).A shut-off nozzle may be advisable if a An easy flowing, three-part, check-ring type of M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.