Technyl® A 221 Natural FA|PA66|Rhodia物性表报告及物性特性介绍,Technyl® A 221 Natural FA|PA66|Rhodia注塑参数详情-塑料物性表查询网

Technyl® A 221 Natural FA|PA66|Rhodia

Technyl® A 221 Natural FA|PA66|Rhodia 物性表: Technyl® A 221 Natural FA|PA66|Rhodia物性表及特性介绍,Technyl® A 221 Natural FA|PA66|Rhodia注塑参数详情,如需Technyl® A 221 Natural FA|PA66|Rhodia下载, 可到相关下载区下载

Product Texts Unreinforced polyamide 66, medium viscosity, for injection moulding, with a special crystallizing agent, for fast cycles. These performances are associated with excellent dimensional stability and good rigidity of moulded parts. This grade is used in a wide variety of industries: 5 / *	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	2 / *	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	80 / *	°C	ISO 75-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	65 / *	E-6/K	ISO 11359-1/-2

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.1 / *	%	Sim. to ISO 62
密度(Density)	1140 / -	kg/m³	ISO 1183

Test specimen production	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
Injection Molding, mold temperature	80	°C	ISO 10724

CharacteristicsProcessingInjection MoldingRegional AvailabilityNorth America, EuropeOther text informationInjection moldingThe material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,2% with a dehumidified air drying equipment at approx 80°C. .
[/td][/tr][/table]

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/wuxingbiao/show-82325.html

免责声明: 本文 Technyl® A 221 Natural FA|PA66|Rhodia 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络