Ultramid® A3WG6 HRX bk 23591|PA66-GF30|BASF物性表报告及物性特性介绍,Ultramid® A3WG6 HRX bk 23591|PA66-GF30|BASF注塑参数详情-塑料物性表查询网

Product TextsGlass fibre reinforced injection moulding grade with enhanced resistance to hydrolysis and heat ageing. I.e.: for applications in the automotive cooling circuit.

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔体体积流动速率(Melt volume-flow rate) (MVR)	10 / *	cm³/10min	ISO 1133
温度(Temperature)	275 / *	°C	ISO 1133
负载(Load)	5 / *	kg	ISO 1133
成型收缩(Molding shrinkage) (parallel)	0.4 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.2 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9500 / 6000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	185 / 110	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3.7 / 7.2	%	ISO 527-1/-2
简支梁冲击强度(Charpy impact strength) (+23°C)	90 / 95	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	75 / 75	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	11 / 15	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	8 / -	kJ/m²	ISO 179/1eA

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	245 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	260 / *	°C	ISO 75-1/-2

其他属性(Other properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
吸水率(Water absorption)	5.95 / *	%	Sim. to ISO 62
吸湿性(Humidity absorption)	1.7 / *	%	Sim. to ISO 62
密度(Density)	1370 / -	kg/m³	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	160 / *	cm³/g	ISO 307, 1157, 1628

CharacteristicsProcessingInjection MoldingDelivery formPelletsSpecial CharacteristicsHeat stabilized or stable to heatRegional AvailabilityEuropeOther text informationInjection moldingPREPROCESSING allowed water content: .15 % ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)