Zytel® 70G43L NC010|PA66-GF43|DuPont物性表报告及物性特性介绍,Zytel® 70G43L NC010|PA66-GF43|DuPont注塑参数详情-塑料物性表查询网

加工/物理特性	值(Value)	单位(Unit)	测试标准(Test Standard)
ASTM数据(ASTM Data)
模具收缩(Mold Shrinkage) (MD)	0.002	mm/mm	ASTM D 955
模具收缩(Mold Shrinkage) (TD)	0.009	mm/mm	ASTM D 955
密度(Density) (73°F)	1510	kg/m³	ASTM D 792
吸水率(Water Absorption) (24hr)	0.6	%	ASTM D 570
吸水率(Water Absorption) (Equilibrium)	4.7	%	ASTM D 570

流变性能(Rheological properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
成型收缩(Molding shrinkage) (parallel)	0.3 / *	%	ISO 294-4, 2577
成型收缩(Molding shrinkage) (normal)	1.0 / *	%	ISO 294-4, 2577

机械性能(机械性能(Mechanical properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	14000 / 11000	MPa	ISO 527-1/-2
破坏时应变(Stress at break)	220 / 160	MPa	ISO 527-1/-2
破坏时应变(Strain at break)	3 / 4	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 10800	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 8000	MPa	ISO 899-1
简支梁冲击强度(Charpy impact strength) (+23°C)	100 / 110	kJ/m²	ISO 179/1eU
简支梁冲击强度(Charpy impact strength) (-30°C)	90 / 80	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度(Charpy notched impact strength) (+23°C)	15 / 18	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度(Charpy notched impact strength) (-30°C)	12 / 12	kJ/m²	ISO 179/1eA
ASTM数据(ASTM Data)
抗拉强度(Tensile Strength)	207	MPa	ASTM D 638
断裂伸长率(Elongation at Break)	2	%	ASTM D 638
弯曲弹性模量(弯曲弹性模量(Flexural Modulus))	11030	MPa	ASTM D 790
抗弯强度(Flexural Strength)	285	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	M 103	-	ASTM D 785
悬臂梁式冲击切口 (1/8 in)	0.133	kJ/m	ASTM D 256

热性能(热性能(Thermal properties))	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
熔化温度(熔化温度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
玻璃化转变温度(Glass transition temperature) (10°C/min)	80 / *	°C	ISO 11357-1/-2
温度负荷变形(Temp. of deflection under load) (1.80 MPa)	255 / *	°C	ISO 75-1/-2
温度负荷变形(Temp. of deflection under load) (0.45 MPa)	263 / *	°C	ISO 75-1/-2
维卡软化温度（50℃/ h的50N）Vicat softening temperature	255 / *	°C	ISO 306
COEFF线性热(Coeff. of linear therm. expansion) (parallel)	15 / *	E-6/K	ISO 11359-1/-2
COEFF线性热(Coeff. of linear therm. expansion) (normal)	80 / *	E-6/K	ISO 11359-1/-2
燃烧性(球压痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
燃烧性(球压痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度测试(Thickness tested)	0.7 / *	mm	IEC 60695-11-10
UL 识别(recognition)	UL / *	-	-
Oxygen index	23 / *	%	ISO 4589-1/-2
ASTM数据(ASTM Data)
UL 94 阻燃等级(Flame rating)	HB	-	UL 94
厚度测试(Thickness tested)	1.5	mm	-
DTUL @ 66 psi	260	°C	ASTM D 648
DTUL @ 264 psi	252	°C	ASTM D 648
熔化温度(Melting 温度(Temperature))	263	°C	ASTM D 3418

电气性能(Electrical properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
相对介电常数(Relative permittivity) (100Hz)	4.5 / -	-	IEC 60250
相对介电常数(Relative permittivity) (1MHz)	4.1 / 4.9	-	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (100Hz)	100 / -	E-4	IEC 60250
耗散因数(耗散因数(Dissipation factor)) (1MHz)	145 / 600	E-4	IEC 60250
体积电阻率(Volume resistivity)	>1E13 / 1E10	Ohm*m	IEC 60093
表面电阻率(Surface resistivity)	* / 1E12	Ohm	IEC 60093
电气强度(Electric strength)	27 / -	kV/mm	IEC 60243-1
相比漏电起痕指数(Comparative tracking index)	600 / -	-	IEC 60112

材料特殊性能(Material specific properties)	dry / cond	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
粘数(Viscosity number)	130 / *	cm³/g	ISO 307, 1157, 1628

流变计算属性(Rheological calculation properties)	值(Value)	单位(Unit)	测试标准(Test Standard)
ISO数据(ISO数据(CAMPUS/ISO) Data)
密度(Density) of melt	1290	kg/m³	-
熔体热导率(Thermal conductivity of melt)	0.25	W/(m K)	-
规格的热容融化(Spec. heat capacity of melt)	2050	J/(kg K)	-
喷射温度(Ejection temperature)	210	°C	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)